Bizhub 500/420 (Phase 2) - Konica Minolta BIZHUB 500 User Manual

Before making copies
No. Part name
7 [Reset] key
8 Sub power switch Turns on/off the copying scanning
9 [Proof Copy] key
10 [Stop] key
11 [Start] key
12 Main Power
indicator
13 Data indicator

bizhub 500/420 (Phase 2)

Description
Press to clear all settings (except
programmed settings) entered in the
control panel and touch panel.
functions.
Turning it off will terminate all the
functions other than the printing and
fax functions, and enter the sleep
mode.
Press to print a single proof copy to
be checked before printing a large
number of copies. (See p. 5-17.)
Pressing the [Stop] key during an
operation temporarily stops the
operation.
Press to start an operation. When
this machine is ready to begin an
operation, the indicator on the [Start]
key lights up in green. If the indicator
on the [Start] key lights up in orange,
the operation cannot begin.
Press to restart a stopped job.
Lights up in green when the machine
is turned on with the main power
switch.
Flashes in green while a print job is
being received.
Lights up in green when a print job is
queued to be printed or while it is
being printed.
1
1-5