Using copy functions
2.10 Selecting the Paper settings
Specifying the paper size
The size of the paper loaded into the bypass tray can
be specified.
For details on selecting the Paper settings, refer to the
User manual [Copy Operations].
The size of the paper loaded into the bypass tray can
be selected in any of the following ways.
Setting
Auto Detect
Custom Size
In order to specify a custom paper size in Enlarge
Display mode, the custom paper size must first be
stored before entering Enlarge Display mode. For
details, refer to the User manual [Copy Operations].
The following procedure describes how to specify the
size of the paper loaded into the bypass tray.
bizhub 500/420 (Phase 2)
Description
Select this setting to automatically detect the
size of the paper loaded into the 1st tray.
A custom paper size can be set so that the
paper tray is used specifically with the
selected paper size.
2
2-37