Konica Minolta BIZHUB 500 User Manual page 68

2
*1
If no finisher is installed and all of the following
conditions are met, printed copies can be fed out and
sorted in an alternating crisscross pattern.
A4- or B5-size paper is used.
Paper of the same size and type is loaded with the w
orientation in one paper tray and with the v orientation
in another tray.
The "Auto Paper Select" setting is selected.
The "Mixed Original" function must not be used.
*2
If the "Corner Staple" or "2 Staples" setting is
selected, the "Sort" setting is automatically selected.
The "Corner Staple" or "2 Staples" setting and the
"Offset" setting cannot be used together.
*3
The Staple settings are available only if optional
finisher FS-511 or finisher FS-510 is installed.
*4
The Punch settings are available only if optional
finisher FS-511 or punch unit PU-501 is installed on
finisher FS-510.
The following procedure describes how to select
Finishing settings.
2-32
Using copy functions
bizhub 500/420 (Phase 2)