Registering The Program - Konica Minolta BIZHUB C250 Operations

Registering/Settings
10.4

Registering the program

A destination (fax number, User Box and E-Mail) to which a call is made
frequently can be combined with the [Scan Setting] or the [Comm. Setting]
that is used as the standard setting before they are registered in the
Program. With these information registered in the Program, just press the
Program key of [Program], and you can set the functions of the registered
destination and the [Scan Setting] or the [Comm. Setting] and send a
message.
- For the Program, up to 400 (001 to 400) can be registered including the
Program of other functions of this machine.
- Each Program can have a Program name.
The explanation here is given of the operation to register the Program, and
the operation to change the Program, and the operation to delete the
Program.
- No registration is available when [Name] and any one of [Scan Setting],
[Comm. Setting] or the Destination are not set.
- [Address Book], [Group] and [Program] can be also registered using the
PageScope Web Connection. Using the PageScope Web Connection,
setting can be changed or addresses can be registered from a computer
connected to the network.
Refer to "PageScope Web Connection" on page 13-3 or the User manual
[Netwok Scanner Operations] for the method to use the PageScope Web
Connection.
bizhub C250 (Phase3)
10
10-25