Function Setting - Konica Minolta BIZHUB C250 Operations

Utility mode

Function Setting

Administrator Setting >> Fax Setting >> Function Setting
Turns ON/OFF transmission/reception functions. (page 11-43)
Item
F-Code
TX
Relay RX
Relay Print
Destina-
tion Check
Display
Function
Memory RX
Closed Network
RX
Forward TX Set-
ting
Incomplete TX
Hold
PC-Fax RX Set-
ting
TSI User Box Set-
ting
bizhub C250 (Phase3)
Description
For details, refer to "Turning ON/OFF
transmission/reception functions" on
page 11-44.
Broadcast the document received from
the originating station as an intermediate
relay station to the terminating station. To
use the Relay RX function, the Relay User
Box should be registered.
Print the document received from the
originating station.
Set whether or not to display the list of
destinations specified at the time of fac-
simile transmission.
The memory reception is the function
used to receive documents and store in
memory so that you can print them out
later as necessary.
The closed area reception is the function
used to receive the incoming data only
when the sender's password is valid.
The Fax transfer is the function used to
transfer the received data to a certain sta-
tion determined in advance.
Documents which could not be transmit-
ted by the auto redial function because of
a communication error or busy remote
station is saved temporarily in the Re-TX
User Box.
The PC-Fax RX Setting feature offers a
procedure for saving files containing re-
ceived faxes in Boxes on the hard disk.
By setting to ON the PC-Fax RX Setting
function, you can set up whether or not to
print the data received and set up the
Communication Password.
This is a function to allocate received
originals according to the TSI information
of faxes received.
Or set up the action when receiving un-
registered TSI information.
Available value
*
ON / OFF
*
ON / OFF
ON / OFF*
*
ON / OFF
*
ON / OFF
*
ON / OFF
Set a password in 4 digits.
*
OFF / Forward & Print / For-
ward & Print (If TX Fails)
Forward Dest.
*
ON / OFF
When the Incomplete TX Hold
is set to ON, specify the Incom-
plete TX Hold Time.
*
OFF / ON
Memory RX User Box / Speci-
fied User Box
Save & Print (ON / OFF*)
Communication Password (ON
/ OFF*)
*
ON / OFF
Automatically Print*/ Memory
RX User Box
Receive & Print (ON / OFF*)
11
11-11