Konica Minolta BIZHUB C250 Operations page 165

Transmission applications
Function
Line Setting
*1
The displays are different depending on the country.
*2
This can be used to transmit to receiving stations with closed area
communication mode selected.
*3
: F-code is used.
It is impossible to communicate with a fax without F-code function.
!
Detail
The key representing the function you select will be appear reversed.
Press [Cancel] to return to the fax screen.
V.34 is a communication mode used by the Super G3 fax.
bizhub C250 (Phase3)
Description
Overseas TX A lower baud rate will be employed. (page 3-53)
ECM OFF Error Correction Mode (ECM) can be disabled. (page 7-40)
V.34 OFF When the V.34 protocol can not be used due to restrictions of
exchange equipment, the V.34 mode is disabled for transmis-
sion. (page 7-43)
Check Desti- This is a function to prevent incorrect transmission. At the time
nation of transmission, the specified fax number is compared with the
fax number information (CSI) of the machine at the remote sta-
tion and the data is transmitted only when both data coincide
with each other. (page 7-48)
Line Selec- Set the line to be used for sending. (page 7-51)
tion
7
7-7