Konica Minolta BIZHUB C250 Operations page 232

9
5
Enter the Bulletin No. in the box following [Bulletin No.].
– You can specify 1 - 999999999(9 digits) as the Bulletin No.
– To correct the wrong entry, use [Del.].
– If you press [C] (clear), all Bulletin board Nos. will be deleted.
6
Press [OK].
– To release the setting, press [OFF].
The Comm. Setting screen will be restored.
7
Press [OK].
The fax screen will be restored.
8
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-12 for information
about setting functions in the fax screen. See "Application
functions overview" on page 7-5 for information about setting
functions in the fax Application screen.
9
Set the original document.
– See "Placing the original on the machine" on page 3-7 for
information about setting the document.
10
Press [Start].
– If you want to stop the FK-502 from reading the document after
pressing [Start], press [Stop] and then press [Yes] on the
Confirmation screen.
The FK-502 reads the document and places it in the Bulletin board.
9-12
Polling
bizhub C250 (Phase3)