Konica Minolta BIZHUB C250 Operations page 207

Transmission applications
5
Press [OK].
The Comm. Setting screen will be restored.
6
Press [OK].
The fax screen will be restored.
7
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-12 for information
about setting functions in the fax screen. See "Application
functions overview" on page 7-5 for information about setting
functions in the fax Application screen.
8
Designate the destination.
– See "Selecting one destination" on page 3-22 for information about
designating the destination.
9
Set the original document.
– See "Placing the original on the machine" on page 3-7 for
information about setting the document.
10
Press [Start].
The FK-502 stores the document in memory before starting
transmission.
!
Detail
To cancel transmission, see "Canceling transmission" on page 3-39.
If the destination is not ready to receive, your call will be redialed. For
information about redialing, see "Recently dialed" on page 3-31.
If transmission fails, refer to "Cannot send messages" on page 5-3.
bizhub C250 (Phase3)
7
7-49