Using Other Equipment - Panasonic SC-VK450 Operating Instructions Manual

Using other equipment

Connecting to a portable audio equipment
This feature enables you to enjoy music from a portable
audio equipment.
MUSIC PORT jack
Audio cord
(not included)
Playing from a portable audio
equipment
Switch off the equalizer function (if there is any) of
the portable audio equipment before you plug into the
MUSIC PORT jack. Otherwise, sound from the speaker
may be distorted.
1
Plug the audio cord into the MUSIC PORT jack
and press [TUNER/MUSIC P.] repeatedly to select
"MUSIC PORT".
2
Play the portable audio equipment. (See the
portable audio equipment's instruction manual.)
Note:
All peripheral components and cables are sold separately.
Recording from a portable audio
equipment
1
Press [TUNER/MUSIC P.] repeatedly to select
"MUSIC PORT".
2
Play the portable audio equipment.
3
Press [ , REC] on the main unit to start
recording.
Portable audio equipment
(not included)
Operating a television
Point the remote control at the television for the following
operations.
Turn the television on/off
Switch the television's video input mode
Adjust the volume
Note:
Some models cannot be operated by this remote control.
Changing the main unit and remote
control mode
The remote control and main unit are factory-set to
"REMOTE 1" mode.
If your remote control affects other equipment during
operation, you can switch to operate in "REMOTE 2"
mode.
To switch to "REMOTE 2" mode
1
While pressing and holding [MUSIC P.] on the
main unit
Press and hold [2] until "REMOTE 2" appears on
the main unit display.
2
Press and hold [ENTER] and [2] for at least 2
seconds.
The main unit and remote control are now set to
operate in "REMOTE 2" mode.
To return to "REMOTE 1" mode
Perform steps 1 and 2 above but use [1] instead of [2]
for both steps. ("REMOTE 1" appears on the main unit
during step 1.)
The remote control cannot work with the main unit if
their modes are different.
"REMOTE 1" or "REMOTE 2" appears on the main unit
display when you operate the remote control.
If "REMOTE 1" appears (The main unit is in "REMOTE
1" mode.)
Press and hold [ENTER] and [1] on the remote control
for at least 2 seconds.
If "REMOTE 2" appears (The main unit is in "REMOTE
2" mode.)
Press and hold [ENTER] and [2] on the remote control
for at least 2 seconds.
Note:
You can still operate a television using the remote control
( see above) even after switching the mode.
29
29