To Store A Non-Standard (Custom) Paper Size - Konica Minolta 8020 User Manual

3

To store a non-standard (custom) paper size

 Two non-standard paper sizes can be stored. Storing paper sizes that are used often enables the pa-
per size to be quickly selected, without having to re-enter the setting.
1
Touch [Paper].
A screen that shows the specified paper size settings appears.
2
Select the 1st drawer, and then touch [Size Change].
3
Touch [Custom Size].
The Custom Size screen appears.
4
Make sure that
5
Touch and
H
Touch until the cursor moves below the fraction that you wish to change.
The entered length of side X appears.
6
Touch .
7
Touch and
H
Touch until the cursor moves below the fraction that you wish to change.
The entered length of side Y appears.
8
Touch [Size Registration].
9
Touch either [1] or [2].
10
Touch [Enter], and then touch [Enter] in the Input screen.
The custom paper size is stored.
3-14
is selected.
to select the length of side X for the paper that is loaded.
to select the length of side Y for the paper that is loaded.
3.5 Loading Paper
Konica 8020/8031