To turn the copier off ....................... 1-18 When the copier is turned off ..................1-18 Using the Touch Panel....................1-19 Description of the Touch Panel ..................1-19 Default Settings ....................... 1-19 Structure of the Display ....................1-20 Operating the Touch Panel ..................... 1-21 Konica 8020/8031...
Page 3
Loading Paper Into the 2nd Drawer or a Paper Feed Unit ..........3-16 To set the “Specialty Paper” function ................3-17 Loading Paper Into the Large Capacity Tray..............3-18 To set the “Specialty Paper” function ................3-19 Loading Paper Into the Manual Bypass Tray ..............3-20 Konica 8020/8031...
Page 4
Selecting the Paper Setting Automatically (“Auto Paper” Setting) ........5-11 Selecting the Paper Manually..................5-11 Selecting the Manual Bypass Tray (“Bypass” Setting) ............ 5-11 Small-Sized Documents ....................5-11 Centering......................... 5-12 Auto Paper Source Selection Feature................5-12 To select the Paper setting....................5-12 Konica 8020/8031...
Page 5
(move it from the list on the Scanned Job screen to the Print List screen) ..... 6-10 Unlock Job Screen ......................6-11 To unlock a job (to print a locked document) ..............6-12 Increase Priority Screen ....................6-13 To increase the priority of (print) a job................6-14 Combine Jobs Screen ..................... 6-15 Konica 8020/8031...
Page 6
To combine jobs ......................6-17 UserBox Screen ......................6-18 To print a job from a user box ..................6-19 Memory Recall Screen ....................6-20 To recall a job from the memory..................6-21 Index Index ..........................7-2 Konica 8020/8031...
Page 7
5 Utility Mode Operations 6 Touch Panel Messages 7 Troubleshooting 8 Appendix Advanced Operations For details on the following topics, refer to the Advanced Operations volume of this User’s Manual. Available Features 1 Auxiliary Functions 2 Scanning Operations Konica 8020/8031...
Advanced Operations This volume includes descriptions on the Auxiliary functions in addition to precautions for the use of the copier. Read the Advanced Operations volume for more information on the various functions that this copier provides for any need. Konica 8020/8031...
Sorting “Non-Sort” setting Copies are fed out as they are printed. “Sort” setting Copies are automatically divided into the specified number of sets with each set containing a copy of each page. Konica 8020/8031...
In addition, up to two zoom ratios specified using the keypad can be stored for later use. “X/Y Zoom” function The copy size can be changed by specifying different scaling proportions (between 0.250 and 4.000) for the vertical and the horizontal dimensions. Konica 8020/8031...
Manual paper selection The tray or drawer containing the appropriate paper that you wish to use can be selected. “Bypass” setting Copies can be made onto the paper loaded into the manual bypass tray. Konica 8020/8031...
Double-sided 2 in 1 copies Select this setting to reduce four document pages to fit one double-sided copy page. Booklet copies Select this setting to make reduced double-sided copies that are laid out to form a book- let. Konica 8020/8031...
Page 15
The double-sided original setting is only available if the optional duplexing document feeder is in- stalled. The double-sided copy settings are only available if the optional duplex unit is installed. Booklet-binding is only available if both the optional finisher FS-231 and the duplex unit are installed. Konica 8020/8031...
Select this setting when copying documents containing only text. “Map” setting Select this setting when copying documents with a background color or documents contain- ing pencil markings or fine colored lines. “Copied Image” setting Select this setting when copying images (documents) printed with this copier. Konica 8020/8031...
Screen Pattern Settings These settings reduce moire patterns* that occur when copying printed photographs (which contain shading) or documents containing lines. Moire patterns: Pattern that occasionally appears when images containing a repeating pattern or lines are copied 1-10 Konica 8020/8031...
Page 18
1.2 Available Features Konica 8020/8031 1-11...
Interrupt mode. In addition, the message “Now in the Interrupt mode” appears on the touch panel. • To cancel Interrupt mode, press the [INTERRUPT] key again. [STOP] key • Press to stop a copy operation. • Scanning of a document is stopped. 1-12 Konica 8020/8031...
Page 20
• Will be used to enlarge the display. (Currently not available) Touch panel contrast-adjusting dial • Use to adjust the contrast of the touch panel. * Job: Any set of consecutive operations, such as those for making copies, scans or computer printouts Konica 8020/8031 1-13...
1.4 Adjusting the Angle of the Control Panel Adjusting the Angle of the Control Panel The control panel can be adjusted to any of three angles. Adjust the control panel to the angle that allows for easy operation. 1-14 Konica 8020/8031...
The angle of the control panel stops at the lower position. To return the control panel to the upper position, pull the control panel release lever toward you, and then pull up on the control panel. Konica 8020/8031 1-15...
The conditions for all modes and functions automatically returning to their default settings can be spec- ified using the “Auto Reset” function on the User’s Choice: 1 screen. For more details, refer to “Spec- ifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume. 1-16 Konica 8020/8031...
(The Low Power mode can also be canceled by pressing any key on the operation panel or by touching the touch panel.) Then, continue with the operations described in “To turn the copier on” on page 1-16. Konica 8020/8031 1-17...
Settings that are not programmed, such as the number of copies Jobs queued to be printed Data scanned using the “Scan to Memory” function Jobs saved with “Memory Recall” function Stored zoom ratios, programmed Copy mode settings, Utility mode settings and User Box settings are not erased. 1-18 Konica 8020/8031...
Operations” of “Utility Mode Operations” in the Administrator Operations volume. The default settings that the copier resets all functions to can be specified using the Utility mode. For more details, refer to “Utility Mode Operations” in the Administrator Operations volume. Konica 8020/8031 1-19...
To activate a function or to select a setting, lightly touch the desired function or setting shown on the touch panel. CAUTION Be careful not to damage the touch panel. § Never push down on the touch panel with force, and never press it using a hard or pointed object. Konica 8020/8031 1-21...
Page 29
1.6 Using the Touch Panel 1-22 Konica 8020/8031...
Make sure that the Output setting “Non-Sort” is selected. • For details, refer to “Selecting an Output Setting” (p. 5-3). Make sure that the Zoom setting “ 1.000” is selected. • For details, refer to “Specifying a Zoom Setting” (p. 5-7). Konica 8020/8031...
Page 32
• If other jobs are being printed, the job will be queued (multi-job feature). Touch [Job Log]. • The printing status of the programmed job and the job’s settings can be viewed. • For details, refer to “Controlling Jobs” (p. 6-1). To quit copying, press the [STOP] key. Konica 8020/8031...
Make sure that paper of the same size as the document is loaded into a paper drawer. Make sure that the number of copies is set to “1”. Press the [START] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Konica 8020/8031...
17-size paper is loaded into a paper drawer. Make sure that the number of copies is set to “1”. Press the [START] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Konica 8020/8031...
Make sure that Letter-size paper is loaded into a paper drawer. Make sure that the number of copies is set to “1”. Press the [START] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Konica 8020/8031...
Make sure that Letter-size paper is loaded into a paper drawer. Make sure that the number of copies is set to “1”. Press the [START] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Konica 8020/8031...
Select the drawer loaded with Letter C paper. Make sure that the number of copies is set to “1”. Press the [START] key. The copy job appears in the job display. Copying is performed in the order that the job was programmed. Konica 8020/8031...
Prepare one postcard. Load the postcard into the manual bypass tray with the top of the postcard entering the feed slot and the side to be printed onto facing down. (The side where the address is written should face up.) Konica 8020/8031...
Page 39
2.2 Practical Copy Examples Adjust the paper guides to the size of the postcard. Lightly slide the postcard into the feed slot as much as possible. The postcard is fed in and copying begins. 2-10 Konica 8020/8031...
To delete a stopped print job, select the job that you wish to cancel, and then touch [Delete]. After touching [Delete], the message “Job has been done improperly. Check the record.” appears. The job being printed is deleted. Touch [Enter]. Konica 8020/8031 2-11...
Press the [INTERRUPT] key. The [INTERRUPT] key indicator goes off and Interrupt mode is canceled. The Copy mode settings for the job before printing was interrupted appear, and printing of the job that was interrupted automatically continues. Konica 8020/8031 2-13...
If the remaining number of copies cannot be made with the current settings, touch [No]. The remaining number of copies of the job for the test print is canceled. The message “Job has been done improperly. Check the record.” appears. Touch [Enter]. 2-14 Konica 8020/8031...
Press the [ACCESS] key. The access code input screen disappears, and the Basic screen appears. Make copies using the desired Copy mode settings. After you finish making your copies, press the [ACCESS] key. The access code input screen appears again. Konica 8020/8031 2-15...
Page 45
2.6 Making Copies Using Accounts 2-16 Konica 8020/8031...
If the optional duplex unit is used to make double-sided copies, only certain types of paper can be used. If the optional finisher is used to sort, punch holes and staple, only certain types of paper can be used. The paper size should be changed by your authorized service representative. Konica 8020/8031...
Page 50
Paper that has been decorated with foil or embossing Paper of various sizes Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached Stapled paper Konica 8020/8031...
Not exposed to direct sunlight Not exposed to a flame Not exposed to high humidity Not extremely dusty Unwrapped paper should be stored in a plastic bag in a cool, dark location. Keep paper out of the reach of children. Konica 8020/8031...
Order for selecting another paper drawer When a different paper drawer is automatically selected, the next paper drawer in the following list is cho- sen. First priority: 2nd drawer Second priority: 3rd drawer Third priority: 4th drawer Fourth priority: 1st drawer Konica 8020/8031...
Slide the lateral guides to fit the size of paper to be load- Note For paper of a non-standard size, first load the paper, and then adjust the lateral guides to the size of the loaded paper. For “12 18” paper, adjust the trailing-edge guides as shown in the illustration. Konica 8020/8031...
Page 54
When loading 4 6 L paper, load them with the short- er side as the leading edge, as shown. Note Do not load 4 6 L paper crosswise, as shown. Konica 8020/8031...
Page 55
Note Do not load envelopes crosswise, as shown. 3-10 Konica 8020/8031...
Page 56
3 sided copying Thick3 Envelope Envelopes Overhead projector transparencies If postcards are loaded, set the media type selection dial to “Thick2”. If label sheets are loaded, set the media type selection dial to “Thick1”. Konica 8020/8031 3-11...
A screen that shows the specified paper size settings ap- pears. Select the 1st drawer. Touch [Size Change]. The Input screen appears. Select the setting for the size of paper that is loaded. Touch [Enter]. The paper size for the 1st drawer is set. 3-12 Konica 8020/8031...
The entered length of side Y appears. Touch [Enter], and then touch [Enter] in the Input screen. The paper size for the 1st drawer is set. Konica 8020/8031 3-13...
The entered length of side Y appears. Touch [Size Registration]. Touch either [1] or [2]. Touch [Enter], and then touch [Enter] in the Input screen. The custom paper size is stored. 3-14 Konica 8020/8031...
Select the 1st drawer, and then touch [Size Change]. Touch [Custom Size]. Touch either [1] or [2] to select the stored custom paper size. Touch [Enter], and then touch [Enter] in the Input screen. The paper size for the 1st drawer is set. Konica 8020/8031 3-15...
Be careful not to touch the surface of the paper take- up roller with your hands. Remove the trailing-edge guide, and then re-install it for the size of paper to be loaded. Slide the lateral guides to fit the size of paper to be load- 3-16 Konica 8020/8031...
For more details, refer to “To set the “Specialty Paper” function” of the Administrator Operations volume. To set the “Specialty Paper” function Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [Specialty Paper]. Select the paper drawer that you wish to set. Select the desired special paper setting. Konica 8020/8031 3-17...
If the paper in a drawer is specified as special paper, the paper in that drawer is not automatically selected with the Paper setting “Auto Paper”. This function is useful if special paper is loaded into a paper drawer. For more details, refer to “To set the “Specialty Paper” function” of the Administrator Operations volume. 3-18 Konica 8020/8031...
3.5 Loading Paper To set the “Specialty Paper” function Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [Specialty Paper]. Select the 3rd drawer. Select the desired special paper setting. Konica 8020/8031 3-19...
, and to select the length of side Y for the paper that is loaded. Touch until the cursor moves below the fraction that you wish to change. Touch [Enter]. Touch [Paper Type]. The Paper Type screen appears. 3-20 Konica 8020/8031...
Page 66
Copies will be made on the surface of the paper facing down when paper is loaded into the manual bypass tray. When loading 4 6 L paper, load them with the short- er side as the leading edge, as shown. Note Do not load 4 6 L paper crosswise, as shown. Konica 8020/8031 3-21...
Page 67
Load the envelopes with the shorter side as the leading edge and with the side to be printed on facing up, as shown in the illustration. Note Do not load envelopes crosswise, as shown. 3-22 Konica 8020/8031...
Page 68
Lightly slide the paper into the feed slot as much as pos- sible so that the edge of the paper is fed into the copier. Feed only one sheet of paper at a time. Copying can begin. Konica 8020/8031 3-23...
Page 69
3.5 Loading Paper 3-24 Konica 8020/8031...
Letter C (8.5 in. × 11 in. C), Invoice L (5.5 in. × 8.5 in L), Invoice C (5.5 in. × 8.5 in. C), 11 in. × 15 in. Paper capacity 38 sheets (55-3/4 lbs.) Orientation Face-up, Normal direction Konica 8020/8031...
Document sizes 17 L — — — — Letter C — — — — Legal L — Letter L — 8-1/2 5-1/2 C — — — 8-1/2 5-1/2 L — — — — — 2: Possible —: Not possible Konica 8020/8031...
Do not place objects exceeding 4-1/2 lbs. on the platen glass. In addition, if a book is placed on the platen glass, do not press it down extremely hard, otherwise the platen glass may be damaged. (The platen glass can withstand a weight of 4-1/2 lbs.) Konica 8020/8031...
Slide the adjustable document guides to fit the size of the document. Be sure to adjust the document guides to the size of the document, otherwise the documents may not be fed in straight. Touch [OrigÖ Copy]. The OriginalÖ Copy screen appears. Konica 8020/8031...
Page 75
After the documents are scanned, they are fed out into the document output tray. When removing large-sized documents, carefully lift up the document feed tray (of the duplexing document feed- er) as far as possible. Remove the documents from the document output tray. Konica 8020/8031...
Page 76
Do not press on the lever at the rear of the copier. § When closing the document feed tray, do not press on the lever at the rear of the copier, otherwise the document feed tray may close quickly and pinch your hand. Konica 8020/8031...
Load the document so that all pages are aligned along the document guide toward the rear of the copier. Be sure to adjust the document guides to the size of the document, otherwise the documents may not be fed in straight. Konica 8020/8031...
Page 78
4.2 Feeding the Document In the Basic screen, touch [Mixed Orig Detection]. Select the desired copy settings, and then press the [START] key. The topmost page of the document is fed in and scanning begins. Konica 8020/8031...
Position the document face down onto the platen glass with the top of the document toward either the rear or the left side of the copier. When loaded lengthwise: Align the document with the document scales. 4-10 Konica 8020/8031...
Page 80
However, the light emitted by the scanner is NOT a laser, and therefore not extremely dangerous. Touch [OrigÖ Copy]. The OriginalÖ Copy screen appears. Konica 8020/8031 4-11...
Page 81
Press the [START] key. The copy job is queued for printing. Lift open the platen cover, or the duplexing document feeder if it is installed, and then remove the doc- ument. Close the platen cover, or the duplexing document feeder if it is installed. 4-12 Konica 8020/8031...
“Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume. To select the Color setting Touch [Color]. A screen appears, showing the specified Color setting. Select the desired Color setting. Konica 8020/8031...
“Intelligent Sorting” function on the User’s Choice: 2 screen. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume. Non-Sorting (“Non-Sort” Setting) The copies are fed out and stacked on top of each other as they are printed. Konica 8020/8031...
If standard-size paper is used, the paper width must be between 7-1/4 in. and 11-3/4 in. If standard-size paper is used, the paper length must be between 7-1/4 in. and 17 in. The copier must not enter Interrupt mode. Konica 8020/8031...
If standard-size paper is used, the paper length must be between 7-1/4 in. and 17 in. The copier must not enter Interrupt mode. To specify Output settings Touch [Output]. A screen appears, showing the available Output settings. Select the desired Output settings. Konica 8020/8031...
Page 87
Example: Document position when the “3-Hole Punch” setting is used The example shows that the document should be positioned so that the top of the document is toward the rear of the copier. For details, refer to “Feeding the Document” (p. 4-5). Konica 8020/8031...
Various zoom settings for making reduced copies from common standard document sizes to standard pa- per sizes are available. For example: An 11 17-size document can be copied onto the smaller Letter-size paper. A Legal-size document can be copied onto the smaller Letter-size paper. Konica 8020/8031...
The copy size can be changed by specifying different scaling proportions (between 0.250 and 4.000) for the vertical and the horizontal dimention. To specify a Zoom setting Touch [Zoom]. A screen appears, showing the available Zoom settings. Select the desired Zoom setting. Konica 8020/8031...
Using the keypad, type in the desired zoom ratio (between 0.250 and 4.000). To store a “Minimal” zoom ratio, type in a zoom ratio between 0.900 and 0.999. The entered zoom ratio is displayed. Touch [1], [2] or [Minimal]. Touch [Enter]. The entered zoom ratio is stored. Konica 8020/8031...
0.250 and 4.000). The entered zoom ratio is dis- played. Touch [Y]. Using the keypad, type in the desired length of side Y (between 0.250 and 4.000). The entered zoom ratio is displayed. Touch [Enter]. The entered zoom ratio is displayed. 5-10 Konica 8020/8031...
Original” function on the User’s Choice: 2 screen allows copying to begin even if the paper size cannot automatically be detected. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume. Konica 8020/8031 5-11...
First priority: 2nd drawer Second priority: 3rd drawer Third priority: 4th drawer Fourth priority: 1st drawer To select the Paper setting Touch [Paper]. A screen appears, showing the available Paper settings. Select the desired Paper setting. 5-12 Konica 8020/8031...
Select this setting when bound documents, like books, are being copied. Book separation (“Separation” setting of the “Book” parameter) Select these settings to make a single-sided copy of each of the two pages of an open book. Konica 8020/8031 5-13...
Page 95
When a “Book Erase” setting is selected, be sure to touch [Original Size] on the Book Erase screen and specify the size of the original. If the document size is incorrect, the correct area of the copy will not be erased. Select a size that corresponds to the size of the book spread. 5-14 Konica 8020/8031...
When a “Book Erase” setting is selected, be sure to touch [Original Size] on the Book Erase screen and specify the size of the original. If the document size is incorrect, the correct area of the copy will not be erased. Konica 8020/8031 5-15...
Page 97
Touch [Enter]. The Book Erase screen appears again. Touch [Enter]. The screen showing the available Book settings appears again. Touch [Enter]. The OriginalÖ Copy screen appears again. 5-16 Konica 8020/8031...
Double-sided 4 in 1 (“2-4 in 1” setting) Note Double-sided, double-sided 2 in 1 and double-sided 4 in 1 copying are only available if the optional duplex unit is installed. Booklet-binding and center-erasing are only available if the optional finisher FS-231 is installed. Konica 8020/8031 5-17...
The copy order during 4 in 1 copying can be specified using the “4 in 1 Copy Order” function on the User’s Choice: 2 screen. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume. 5-18 Konica 8020/8031...
Page 100
“2 in 1, 4 in 1, Booklet Copy Zoom” function on the User’s Choice: 2 screen. For more details, refer to “Specifying Default Settings (“User’s Choice” Functions)” of “Utility Mode Operations” in the Administrator Operations volume. Konica 8020/8031 5-19...
Page 101
Width: Maximum 11-3/4 in., Minimum 8-1/4 in. Length: Maximum 17 in., Minimum 11 in. Center-erasing (“Center Erase” setting) When making copies using the “Booklet Creation” setting, this setting erases the area along the binding, at the center of the pages. 5-20 Konica 8020/8031...
Select the desired 2 in 1 or 4 in 1 Copy setting. If “Booklet Creation” is selected, [Bind] appears. [Bind] only appears if the optional finisher FS-231 is installed. To create a booklet, touch [Bind]. As a default, “Bind” is not selected. Konica 8020/8031 5-21...
Page 103
5.6 Selecting the Orig > Copy Settings (Copy Settings) If “Bind” is selected, [Center Erase] appears. As a default, “Center Erase” is selected. If you do not wish to use center-erasing, touch [Center Erase] to cancel it. Touch [Enter]. The OriginalÖ Copy screen appears again. 5-22 Konica 8020/8031...
The Original Direction and Margin settings are described below. For details about the Original settings and the Copy settings, refer to p. 5-13 and p. 5-17. There are three document settings that can be specified. Document orientation (“Original Direction” setting) Document binding margin position (“Margin” setting) Thick documents (“Thick Original” setting) Konica 8020/8031 5-23...
4 in 1 copies will not be printed correctly. Portrait and landscape orientations With the portrait orientation, the paper is vertical, like with portraits or photos of people. With the landscape orientation, the paper is horizontal, like with landscapes. 5-24 Konica 8020/8031...
For details, refer to “Feeding the Document” (p. 4-5). Specifying Thick Documents (“Thick Original” Setting) Select this setting if a thick document is being copied. To specify a thick document (34-1/4 lbs. to 55-3/4 lbs.), touch [Thick Original]. Konica 8020/8031 5-25...
When loading a document with a binding margin, position the top of the document toward the rear of the copier. For details, refer to “Feeding the Document” (p. 4-5). If a thick document is being copied, touch [Thick Original]. 5-26 Konica 8020/8031...
Copies with a specific background density (“Background” parameter of the “Density” function) Copies with a specific density (“Density” parameter of the “Density” function) Copies with a glossy finish (“Glossy Mode” setting) Originals that cause moire patterns (“Screen Pattern” settings) Konica 8020/8031 5-27...
Select this setting when copying documents with a background color or documents containing pencil markings or fine colored lines. A sharp copy image is produced. “Copied Image” setting Select this setting when copying images (documents) printed with this copier. 5-28 Konica 8020/8031...
The “Screen Pattern” settings are available if the “Text”, “Photo Image”, “Printed Image” or “Copied Image” setting is selected. Gradation: Select this setting to give the gradation priority. Resolution: Select this setting to give the resolution priority. Konica 8020/8031 5-29...
Select the setting for the type of document to be copied. Touch [Density]. The Density screen appears. Touch [Lighter] or [Darker] to select the desired back- ground density level. Touch [Auto]. The automatic background density setting is selected. Touch [Enter]. 5-30 Konica 8020/8031...
Regardless of which Screen Pattern setting is selected, the moire patterns in copied images can- not be completely removed. Moire patterns are the patterns that occasionally appear when images containing a repeating pat- tern or lines are copied. Konica 8020/8031 5-31...
There are three screens that allow you to check the settings. To check the settings Press the [CHECK] key on the operation panel. The first screen showing the current settings appears. Touch [Next] to display the second screen of settings. 5-32 Konica 8020/8031...
Touch [Next] or [BackUp] until the screen containing the setting that you wish to change appears. Touch the setting that you wish to change. The corresponding screen appears. Change the setting in the same way that it would normally be set. Konica 8020/8031 5-33...
Page 115
5.9 Checking the Settings 5-34 Konica 8020/8031...
Jobs are numbered in the order that they are programmed and queued for printing. The job number identifies the job; it does not indicate the printing order. In addition, the job number does not change until the job is deleted. Konica 8020/8031...
Then, touch [Delete]. To quit canceling the job being printed, press the [START] key. Printing continues. After touching [Delete], the message “Job has been done improperly. Check the record.” appears. The job being printed is canceled. Touch [Enter]. Konica 8020/8031...
While the job is being printed, the number of pages remaining to be printed is counted down. Beginning time Displays the time that the job was programmed. Completion time Displays the time when printing of the job is expected to be finished. Konica 8020/8031...
Displays the transmission method. Status Displays the status of the job. Recipient Displays the name of the recipient. Original Displays the number of pages in the original document. Beginning time Displays the time that the job was programmed. Konica 8020/8031...
(higher or lower in the printing order). Job name Displays the type (source) of the job. “COPIER” is displayed for copy jobs. Status Displays the status of the job. Completion time Displays the time when printing of the job is expected to be finished. Konica 8020/8031...
Completion time Displays the time when printing of the job is expected to be finished. Result Displays the job process details. Job status Displays details of any errors that may have occurred while the job was being performed. Konica 8020/8031...
Completion time Displays the time when printing of the job is expected to be finished. Result Displays the job process details. Job status Displays details of any errors that may have occurred while the job was being performed. Konica 8020/8031...
Displays the number of pages in the original document. Copy Displays the number of pages in the copy. While the job is being printed, the number of pages remaining to be printed is counted down. Beginning time Displays the time that the job was programmed. Konica 8020/8031...
Touch [Job Log], and check the status of the job. For details on setting the “Scan to Memory” function, refer to “Storing the Scanned Image in the Memory (“Scan to Memory” Function)” of “Auxiliary Functions” in the Advanced Operations volume. 6-10 Konica 8020/8031...
Displays the number of pages in the original document. Copy Displays the number of pages in the copy. While the job is being printed, the number of pages remaining to be printed is counted down. Beginning time Displays the time that the job was programmed. Konica 8020/8031 6-11...
If the job currently being printed cannot be interrupted, printing is interrupted after printing for the current job is finished. Touch [Job Log], and check the status of the job. For details on setting the “Locked Job” function, refer to the manual of the printer controller. 6-12 Konica 8020/8031...
While the job is being printed, the number of pages remaining to be printed is counted down. Beginning time Displays the time that the job was programmed. Completion time Displays the time when printing of the job is expected to be finished. Konica 8020/8031 6-13...
Select the job that you wish to prioritize. Touch [OK]. The job is move from the Increase Priority list to the list of jobs to be printed, and the job is queued for printing. Touch [Job Log], and check the status of the job. 6-14 Konica 8020/8031...
“Image Repeat” function “Color Separation” function “OHP Interleaving” function Touch [Combine Jobs]. The Combine Jobs screen appears. Jobs stored in the memory appear in order from the top of the list. Touch [Basic] to display the Basic screen again. Konica 8020/8031 6-15...
Page 131
Displays the number of pages in the original document. Copy Displays the number of pages in the copy. While the job is being printed, the number of pages remaining to be printed is counted down. Beginning time Displays the time that the job was programmed. 6-16 Konica 8020/8031...
Touch [OK]. The jobs are deleted from the list on the Combine Jobs screen. The Print List screen of Job Log appears. The selected jobs are combined into one. On the Print List screen, check the status of the jobs. Konica 8020/8031 6-17...
Displays the number of pages in the original document. Copy Displays the number of pages in the copy. While the job is being printed, the number of pages remaining to be printed is counted down. Beginning time Displays the time that the job was programmed. 6-18 Konica 8020/8031...
Page 134
The job is deleted from the list on the Scanned Job screen. The status of the job changes from “Job Stored” to “Waiting Print”, and the job is queued for printing. Touch [Job Log], and check the status of the jobs. Konica 8020/8031 6-19...
Job identification number assigned when the job is programmed. Up/down arrows When there are more than five jobs, press these arrows to display jobs higher or lower in the list (higher or lower in the printing order). 6-20 Konica 8020/8031...
Touch [OK]. The jobs are deleted from the list on the Memory Recall screen. The job changes from one stored in the memory to one waiting to be printed. Touch [Job Log], and check the status of the jobs. Konica 8020/8031 6-21...
Page 137
6.3 Job Control Screens 6-22 Konica 8020/8031...
Page 143
7.1 Index zooming ........................1-5 Konica 8020/8031...
Page 144
Konica Business Technologies, Inc. 500 Day Hill Road Windsor, CT 06095 Telephone (860) 683-2222 OP-8020/8031BSC-01 4581-7706-01 Printed in Japan August 2002...