1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. Copier
  5. 8031
  6. Instruction manual

Konica Minolta 8031 Instruction Manual

Hide thumbs Also See for 8031:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Basic Operations, User Manual
Administrator
Operations

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta 8031

Summary of Contents for Konica Minolta 8031

  • Page 1 Administrator Operations...

  • Page 2: Table Of Contents

    CAUTION ..................2-2 Warning and Precaution Symbols..........2-3 Meaning of Symbols ..............2-3 WARNING..................2-4 CAUTION ..................2-5 Precautions for Routine Use............2-6 For Users in countries not subject to Class B regulations..2-6 LED Radiation Safety..............2-6 Ozone Release................2-7 Acoustic noise (For European Users Only)........2-7 Konica 8020/8031...
  • Page 3 To set the “Auto Reset” function........... 5-16 To set the “Low Power” function........... 5-17 To set the “Shut off” function ............5-18 To set the “Auto Clear Mode” function.......... 5-19 To set the “Enlarge-Display Notice” function ........ 5-20 “Specialty Paper” Settings ............5-21 Konica 8020/8031...
  • Page 4 To set the “Copy Track Mode” parameter ........5-63 To print a “Copy Track Data” counter..........5-66 To initialize a “Copy Track Mode” counter ........5-67 To specify settings for a “Copy Track Data” counter.....5-69 To specify permissions for an account..........5-71 To apply the specified limits ............5-73 Konica 8020/8031...
  • Page 5 Display in Enlarge Display Mode..........6-55 When the Message “XXXX needs to be replaced soon.” Appears ..................6-57 Display in Enlarge Display Mode..........6-57 6.10 When the Message “Replace XXXX.” Appears......6-58 Display in Enlarge Display Mode..........6-58 Konica 8020/8031...
  • Page 6 Troubleshooting When the Print Quality Is Poor ............7-2 When the Copier Is Not Operating Correctly......7-4 Appendix Specifications................8-2 Copier Konica 8020/8031..............8-2 Duplex Unit AD-231 ................8-3 Duplexing Document Feeder DF-332 ..........8-4 Paper Feed Unit PF-232 ..............8-5 Large Capacity Tray DB-432............8-5 Finisher FS-231................8-5 Finisher FS-135................8-6...
  • Page 7 Enlarge Display Mode Operation Guide For details on the following topics, refer to the Enlarge Display Mode Operation Guide. 1 Before Making Copies 2 Basic Copy Operations 3 Copy Paper 4 Original Documents 5 Specifying Copy Settings 6 Job List Konica 8020/8031...

  • Page 8: Introduction

    Introduction...

  • Page 9: Structure Of This Manual

    The Basic Operations volume of the Instruction Manual contains details on the operation of the various functions. When using the Enlarge Display mode, first read the Basic Operations volume before referring to the Enlarge Display Mode Operation Guide. Konica 8020/8031...

  • Page 10: Explanation Of Manual Conventions

    Text formatted in this style provides additional assistance. ➜ Text formatted in this style describes the action that will ensure the desired results are achieved. [COPY] key The names of keys on the control panel are written as shown above. Konica 8020/8031...

  • Page 11: Explanation Of Basic Concepts And Symbols

    During copying, paper is supplied from the right side of the copier and fed into the copy tray on the top or the finishing option at the left with the printed surface of the copy facing down. The paper feed direction is shown by the arrows in the diagram below. Konica 8020/8031...

  • Page 12: Width" And "Length

    (X), the paper has a horizontal or landscape orientation, indicated by either “C” or Portrait and Landscape Portrait With the “portrait” orientation, the paper is vertical, like a portrait. Landscape With the “landscape” orientation, the paper is horizontal, like a landscape. Konica 8020/8031...

  • Page 13: Display Icons

    Second side of a double-sided copy on thick paper 2 Second side of a double-sided copy on thick paper 3 Paper Supply Icons The icons shown below are displayed to indicate the amount of paper that remains. The paper is low. The paper is empty. Konica 8020/8031...

  • Page 14: Energy Star

    ® switch to a “low-power mode” after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Konica 8020/8031...
  • Page 15 ® 1.4 Energy Star Konica 8020/8031...

  • Page 16: Safety Information

    Safety Information...

  • Page 17: Caution Labels And Indicators

    If any caution labels or caution indicator is soiled, please clean to make legible. If you cannot make them legible, or if the caution label or indicator is damaged, please contact your authorized service representative for replacement labels. Konica 8020/8031...

  • Page 18: Warning And Precaution Symbols

    This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. Konica 8020/8031...

  • Page 19: Warning

    Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Connect the power cord to an electrical outlet that is equipped with a grounding terminal. Konica 8020/8031...

  • Page 20: Caution

    Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. Konica 8020/8031...

  • Page 21: Precautions For Routine Use

    There is no possibility of danger from the LED optical radiation, because the LED optical radiation level does not exceed the accessible radiation limit of class 1 under all conditions of operation, maintenance, service and failure. Konica 8020/8031...

  • Page 22: Ozone Release

    Acoustic noise (For European Users Only) Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70 dB (A). Konica 8020/8031...
  • Page 23 2.8 Acoustic noise (For European Users Only) Konica 8020/8031...

  • Page 24: Precautions

    Precautions...

  • Page 25: Installation Precautions

    The power source requirements are as follows. Voltage fluctuation: Maximum ±10% (AC 127 V areas only: Between –10% and +6%) Frequency fluctuation: Maximum ±0.3% ❍ Use a power source with as little voltage or frequency fluctuations as possible. Konica 8020/8031...

  • Page 26: Space Requirements

    1,432 (56-1/2) 1,839 (72-1/2) (21-1/4) (31-1/4) (11-1/4) 1,271 (50) (11-1/4) Unit: mm (inch) Note Be sure to allow a clearance of 100 mm (3.9 in.) or more at the back of the copier for the ventilation duct. Konica 8020/8031...

  • Page 27: Operation Precautions

    Always make sure that the copier’s power plug is accessible and not hidden by the copier. Always unplug the copier from the electrical outlet if the unit is not to be used for a long period of time. Always provide good ventilation when making a large number of continuous copies. Konica 8020/8031...

  • Page 28: Transporting The Copier

    Use only toner that has been manufactured specifically for this copier. Never use other types of toner. Keep all supplies out of the reach of children. Konica 8020/8031...

  • Page 29: Storage Of Copies

    Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. Konica 8020/8031...

  • Page 30: Legal Restrictions On Copying

    Copyrighted works without permission of the copyright owner You are prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. Konica 8020/8031...
  • Page 31 3.3 Legal Restrictions on Copying Konica 8020/8031...

  • Page 32: Part Names And Their Functions

    Part Names and Their Functions...

  • Page 33: Components And Their Functions

    • If the finisher is installed, the printer must be installed on the copy desk, on the large capacity tray or over a paper feed unit combined with the copy table. Option Tray FT-331 If finisher FS-135 is installed, the number of paper output trays (optional) can be increased. Konica 8020/8031...
  • Page 34 Copier Stand DK-232 Reduces the installation area required for the equipment if the (optional) scanner is installed on the top of the stand and the printer is installed on the inside. Referred to as the copier stand throughout the manual. Konica 8020/8031...
  • Page 35 46 sheets 340 sheets Photographs Maps * The number of document pages that can be stored was calculated based on our standard document page. The number of pages that can be stored will vary depending on the document. Konica 8020/8031...

  • Page 36: Parts Names And Their Functions

    The paper size can be adjusted freely. Special paper can be loaded. (See section 3.5 in the Basic Operations volume.) Front door Opened when replacing a toner cartridge. (See p. 6-5) Copy output tray Collects copies fed out of the copier facing down. Konica 8020/8031...
  • Page 37 Indicates the amount of paper remaining. Paper-empty indicator • Flashing: Indicates that there is little paper remaining. • Lit: Indicates that the paper is empty. 2nd drawer Replenish the paper. Paper-empty indicator Left-side door Opened when servicing the copier. Konica 8020/8031...
  • Page 38 Used for connecting the scanner’s power cord. Scanner connector Used for connecting the scanner hookup cord. Scanner power cord socket Used for connecting the scanner’s power cord. Duplexing Document Feeder Used for connecting the duplexing document feeder hookup connector cord. Konica 8020/8031...

  • Page 39: Supplies And Parts

    Filter Collects the toner dust generated in the copier. LED-cleaning tool Used to clean the surface of the LED unit, for example, when replacing the image transfer belt unit. Dust remover Collects the dust generated in the copier. Konica 8020/8031...

  • Page 40: Inside Of Copier

    Used to remove the imaging unit. Charger-cleaning tool Used to clean the charger wire, for example, when incorrect copies are produced. Imaging unit release lever Used to install and replace the imaging unit. Toner cartridge Contains a toner cartridge for each color. compartments Konica 8020/8031...

  • Page 41: Options

    Opened when clearing a paper misfeed within the duplex unit. Paper Feed Unit Part Name Description 3rd drawer Holds up to 500 sheets of paper. As many as two units can be installed. 4th drawer The paper size can be adjusted freely. 4-10 Konica 8020/8031...
  • Page 42 Collects copies. (elevated tray) Upper door Opened when clearing a paper misfeed within the finisher. Paper guide Opened when clearing a paper misfeed within the finisher. Transport guide Opened when clearing a paper misfeed within the finisher. Konica 8020/8031 4-11...
  • Page 43 Primary paper output tray Collects copies that are not sorted. (made with the “Non-Sort” (non-sorted copies) setting) Upper cover Opened when clearing a paper misfeed within the finisher. Option Tray Part Name Description Option Tray (optional) Collects copies. 4-12 Konica 8020/8031...

  • Page 44: Utility Mode Operations

    Utility Mode Operations...

  • Page 45: Utility Screen

    The administrator access code (4-digit password) must be entered in order to set the Administrator mode functions. For details on the administrator access code, contact your authorized service representative. Konica 8020/8031...

  • Page 46: Specifying The Input Screen Functions

    (Refer to p. 5-5) User-specified copy modes can be stored as copy programs. Up to 10 specified copy modes can be stored as copy programs. These stored copy programs can be recalled by touching [Copy Program Recall] on the Utility screen. Konica 8020/8031...

  • Page 47: Specifying The Initial Mode Settings ("Reset Mode" Function)

    Touch [Set-up Mode]. Touch [Input]. Note If [Set-up Mode] is selected, the current Copy mode settings are stored as the initial mode settings. Touch [Enter], and then touch [Enter] again in the screen that appears. Touch [Fin. Time]. Konica 8020/8031...

  • Page 48: Using Copy Programs

    To check the specified settings of a program Touch [Check], and then touch the number of the program that you wish to check. The specified Copy mode settings are displayed. To return to the Job Memory Input screen, touch [Enter]. Konica 8020/8031...

  • Page 49: To Recall A Stored Copy Program And Use It To Make Copies

    [Menu]. The Job Recall screen appears again. Touch the correct number of the program that you wish to recall. Press the [START] key. The copy job is queued for printing with the recalled Copy mode settings. Konica 8020/8031...

  • Page 50: Specifying Default Settings ("User's Choice" Functions)

    This function is used to specify the length of time after the last operation until the copier automatically enters Low Power mode. (Refer to p. 5-18) This function is used to specify the length of time after the last operation until the copier automatically enters Shut off mode. Konica 8020/8031...
  • Page 51 This function is used to specify whether all modes and functions are automatically reset when the key counter is removed. (Refer to p. 5-20) This function is used to specify the length of time that the message requesting confirmation to cancel the Enlarge Display mode is displayed. Konica 8020/8031...

  • Page 52: User's Choice: 2 Screens

    This function is used to specify the page order for 4 in 1 copying. (Refer to p. 5-31) This function is used to specify whether or not the image is centered when the document is smaller than the paper. Konica 8020/8031...

  • Page 53: To Set The "Confirmation Beep" Function

    (The default setting is [ON].) Press the [UTILITY] key. Touch [User’s Choice: 1]. Touch [Confirmation Beep]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-10 Konica 8020/8031...

  • Page 54: To Set The "Date/Time Set" Function

    Specify the settings for [Month], [Day], [Hour], [min.] and [Time Zone] in the same way. Touch [Time Zone] first before touching [+/-] to specify the time zone. The time zone setting is the time difference from Greenwich Mean Time. Konica 8020/8031 5-11...
  • Page 55 5.2 Specifying Default Settings (“User’s Choice” Functions) Touch [Enter]. The clock begins ticking. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-12 Konica 8020/8031...

  • Page 56: To Set The "Memory Recall" Function

    Recall” function to “No”. For details on setting the “Copy Track Mode” parameter on the “Copy Track” screen, refer to “To set the “Copy Track Mode” parameter” of “Supervising Copier Use (Copy Track Functions)” in chapter 5 “Utility Mode Operations”. Konica 8020/8031 5-13...
  • Page 57 5.2 Specifying Default Settings (“User’s Choice” Functions) Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-14 Konica 8020/8031...

  • Page 58: To Set The "Key Repeat Start Time/Interval" Function

    Touch [L] and [M] to specify the desired length of time until the repeat feature for a key starts (between 0.1 and 3.0 seconds). Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-15...

  • Page 59: To Set The "Auto Reset" Function

    (between 1 and 9 minutes). ❍ If you do not wish for the copier to automatically reset its modes and functions, touch [No]. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-16 Konica 8020/8031...

  • Page 60: To Set The "Low Power" Function

    Press the [C] (CLEAR QTY.) key. The current setting is erased. Using the keypad, enter the desired length of time (between 10 and 240 minutes). Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-17...

  • Page 61: To Set The "Shut Off" Function

    (between 15 and 240 minutes). ❍ If you do not want the copier to enter Shut off mode, touch [No]. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-18 Konica 8020/8031...

  • Page 62: To Set The "Auto Clear Mode" Function

    Documents/Feeding the Document” in the Basic Operations volume. Press the [UTILITY] key. Touch [User’s Choice: 1]. Touch [2/2]. Touch [Auto Clear Mode]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-19...

  • Page 63: To Set The "Enlarge-Display Notice" Function

    If you do not wish for the message requesting confirmation to cancel the Enlarge Display mode to appear, touch [No]. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-20 Konica 8020/8031...

  • Page 64: Specialty Paper" Settings

    “Specialty” setting Select this setting for paper, other than “High Quality Paper” or “Single Sided Only” paper, that should not be selected automatically. Paper with this setting is not automatically selected with the Paper setting “Auto Paper”. Konica 8020/8031 5-21...

  • Page 65: To Set The "Specialty Paper" Function

    Touch [User’s Choice: 2]. Touch [Specialty Paper]. Select the paper drawer that you wish to set. Select the desired paper setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-22 Konica 8020/8031...

  • Page 66: Specifying The Output Tray Priority

    Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [Priority exit tray]. Select the output tray that you wish to assign to each application. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-23...

  • Page 67: To Set The "Intelligent Sorting" Function

    (The default setting is [Yes].) Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [Intelligent Sorting]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-24 Konica 8020/8031...

  • Page 68: To Set The "Criss Cross Mode" Function

    Document” in the Basic Operations volume. Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [Criss Cross Mode]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-25...

  • Page 69: To Set The "Priority Device" Function

    Print jobs are queued as a job when the data for the first page is received. Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [Priority Device]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-26 Konica 8020/8031...

  • Page 70: To Set The "Acs Judgement Level Adjust." Function

    Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [2/2]. Touch [ACS Judgement Level Adjust.]. Touch to specify the desired detection level. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-27...

  • Page 71: To Set The "2 In 1, 4 In 1, Booklet Copy Zoom" Function

    [Presets].) Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [2/2]. Touch [2in1, 4in1, Booklet Copy Zoom]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-28 Konica 8020/8031...

  • Page 72: To Set The "Auto-Select Paper For Small Original" Function

    In this case, since the document size cannot be detected and the paper cannot be automatically selected, the paper (source) must be selected. Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [2/2]. Touch [Auto-select Paper for Small Original]. Konica 8020/8031 5-29...

  • Page 73: To Set The "4 In 1 Copy Order" Function

    (The default setting is [ Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [2/2]. Touch [4in1 Copy Order]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. 5-30 Konica 8020/8031...

  • Page 74: To Set The "Centering" Function

    (The default setting is [Yes].) Press the [UTILITY] key. Touch [User’s Choice: 2]. Touch [2/2]. Touch [Centering]. Select the desired setting. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-31...

  • Page 75: Viewing Counters ("Meter Count" Function)

    Printer Size: Total number of full-color printouts on paper specified as large-size paper Copy+Printer: Total number of full-color copies and printouts Mono Color counters Copy Total: Total number of monotone copies Copy Size: Total number of monotone copies on paper specified as large-size paper 5-32 Konica 8020/8031...
  • Page 76 Select the desired color mode. The counters are displayed. To print the list of counters, touch [Print] and then press the [START]. The list of counters is printed. *The lists are only printed in English. Touch [Cancel]. Touch [Fin. Time]. Konica 8020/8031 5-33...

  • Page 77: Viewing Part Maintenance Levels ("Unit Life Indicator" Function)

    To print the maintenance levels for the copier, touch [Print], and then press the [START] key. The list of maintenance levels are printed. *The list is only printed in English. Touch [Cancel]. Touch [Fin. Time]. 5-34 Konica 8020/8031...

  • Page 78: Administrator Mode Operations

    (Refer to p. 5-40) In the Expert mode, you can make various expert adjustments, such as color shift corrections and print area adjustments. (Refer to p. 5-56) This function is used to adjust the gradation levels of images. Konica 8020/8031 5-35...

  • Page 79: To Set The "Top Erase" Function

    Press the [UTILITY] key. Touch [Admin. Mode]. Using the keypad, enter the administrator access code. Touch [Admin. set]. Touch [Top Erase]. Select the desired setting. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. 5-36 Konica 8020/8031...

  • Page 80: To Set The "Disable Shut Off Mode" Function

    Press the [UTILITY] key. Touch [Admin. Mode]. Using the keypad, enter the administrator access code. Touch [Admin. set]. Touch [Disable Shut off Mode]. Touch [Yes]. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-37...

  • Page 81: To Set The "A3 Wide Paper Size" Function

    Press the [UTILITY] key. Touch [Admin. Mode]. Using the keypad, enter the administrator access code. Touch [Admin. set]. Touch [A3 wide paper size]. Select the desired setting. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. 5-38 Konica 8020/8031...

  • Page 82: To Set The "Language Selected" Function

    Touch [Admin. Mode]. Using the keypad, enter the four-digit administrator access code. Touch [Admin. set]. Touch [Language Selected]. Select the desired language. Touch [Enter]. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-39...

  • Page 83: Specifying Expert Mode Functions

    These functions are used to make fine adjustments to the print area margins of a printed image. (Refer to p. 5-54) This function is used to make fine adjustments to the center stapling position and the folding position when binding. 5-40 Konica 8020/8031...

  • Page 84: To Set The "Thick Paper And Ohp Film Image Density" Function

    Using the keypad, enter the administrator access code. Touch [Expert Mode]. Touch [Thick Paper and OHP Film Image Density]. Touch to adjust the image density. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-41...

  • Page 85: To Adjust The Color Shifts Manually

    Using the keypad, enter the administrator access code. Touch [Expert Mode]. Touch [Color Shift Correction(Bk)]. Press the [START] key. The automatic color shift adjustment procedure begins, and the test pattern is printed on the A3-size paper. Paper feed direction 5-42 Konica 8020/8031...
  • Page 86 If horizontal lines A and B are angled as shown at the right, touch specify the desired positive adjustment for θ (between +1 dot and +10 dots). Press the [START] key. The adjusted test pattern is printed on A3-size paper. Konica 8020/8031 5-43...
  • Page 87 “X” (between -1 dot and -6 dots). If the lines are shifted as shown at the right, touch to specify the desired positive adjustment for “X” (between +1 dot and +6 dots). 5-44 Konica 8020/8031...
  • Page 88 (steps 13 to 23) to adjust the magenta shift. Touch [Color Shift Correction(Y)] and repeat the same procedure for the yellow shift. Touch [Enter]. The Expert User’s Mode screen appears again. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-45...

  • Page 89: To Set The "Monochrome Image Density Correct" Function

    Touch [Admin. Mode]. Using the keypad, enter the administrator access code. Touch [Expert Mode]. Touch [Monochrome Image density correct]. Touch to adjust the image density. Touch [Enter]. Touch [Fin. Time] in the next three screens that appear. 5-46 Konica 8020/8031...

  • Page 90: To Set The "Stabilizer" Function

    Turn the media type selection dial to Envelope the setting for the type of paper Plain Plain loaded. Thick1 Press the [UTILITY] key. Touch [Admin. Mode]. Thick1 Thick2 Using the keypad, enter the Thick3 administrator access code. Thick2 Thick3 Touch [Expert Mode]. Konica 8020/8031 5-47...
  • Page 91 (between +0.1 mm and +3.0 mm). If the top margin is more than 5.5 mm, touch to specify the desired negative adjustment (between -0.1 mm and -3.0 mm). Press the [START] key. The adjusted test pattern is printed on A3-size paper. 5-48 Konica 8020/8031...
  • Page 92 Check the print result to make sure that the top margin is adjusted to between 4.5 mm and 5.5 mm. ❍ If more adjustment is necessary, return to step 8 and repeat the adjustment procedure. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-49...

  • Page 93: To Set The "Prt Area (Left Margin)" Function

    Press the [UTILITY] key. Touch [Admin. Mode]. Using the keypad, enter the administrator access code. Touch [Expert Mode]. Touch [PRT Area (Left Margin)]. Touch [1st Drawer]. Press the [START] key. The test pattern is printed on the A3-size paper. 5-50 Konica 8020/8031...
  • Page 94 Check the print result to make sure that the left margin is adjusted to between 2.5 mm and 3.5 mm. ❍ If more adjustment is necessary, return to step 8 and repeat the adjustment procedure. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-51...

  • Page 95: To Set The "Prt Area (Dup. Left Margin)" Function

    Press the [UTILITY] key. Touch [Admin. Mode]. Using the keypad, enter the administrator access code. Touch [Expert Mode]. Touch [PRT Area (Dup. Left Margin)]. Touch [1st Drawer]. Press the [START] key. The test pattern is printed on A3-size paper. 5-52 Konica 8020/8031...
  • Page 96 Check the print result to make sure that the left margin for the second side is adjusted to between 2.5 mm and 3.5 mm. ❍ If more adjustment is necessary, return to step 8 and repeat the adjustment procedure. Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-53...

  • Page 97: To Set The "Center Binding Position" Function

    If the staple position is too far to the left of the center of the paper, touch to specify the desired positive adjustment (between +1 mm and +7 mm). 5-54 Konica 8020/8031...
  • Page 98 Touch [Fin. Time] in the next three screens that appear. Use the “Booklet Creation” setting to make another copy sample. Check the print result. ❍ If more adjustment is necessary, return to step 1 and repeat the adjustment procedure. Konica 8020/8031 5-55...

  • Page 99: To Set The "Gradation Adjust" Function

    A test pattern is printed. After the test pattern is printed, the screen changes, as shown at the right. Place the printed test pattern on the platen glass with the edge with the printed crop marks aligned along the document scale. 5-56 Konica 8020/8031...
  • Page 100 Based on the scanned image, the gradation levels are automatically adjusted. After the gradation levels are adjusted, the Admin. Mode screen appears again. Repeat steps 5 through 12 three times. Touch [Fin. Time], and then touch [Fin. Time] again in the screen that appears. Konica 8020/8031 5-57...

  • Page 101: To Set The "Stabilizer" Function

    Touch [Stabilizer]. Press the [START] key. The indicator on the [START] key changes to orange, and the image stabilization operation is performed. The indicator on the [START] key changes back to green. The image stabilization procedure is finished. 5-58 Konica 8020/8031...
  • Page 102 5.5 Administrator Mode Operations Touch [Enter]. Touch [Fin. Time] again in the next three screens that appear. Konica 8020/8031 5-59...

  • Page 103: Supervising Copier Use (Copy Track Functions)

    Total Count: All color modes Black: Color setting “Black” Full Color: Color setting “Full Color” copy mode Mono Color: “Monotone” function Each of the color modes listed above can apply to each print type listed below. Copy + Print Copy Print 5-60 Konica 8020/8031...
  • Page 104 User’s Choice: 1 screen must be set to “No”. For details on setting the “Memory Recall” function on the User’s Choice: 1 screen, refer to “To set the “Memory Recall” function” of “Specifying Default Settings (“User’s Choice” Function)” in chapter 5 “Utility Mode Operations”. Konica 8020/8031 5-61...
  • Page 105 Color Limit Copy Total Count Total Count Size Black Total Count Size Full Color Total Count Size Mono Color Total Count Size Print Total Count Total Count Size Black Total Count Size Full Color Total Count Size 5-62 Konica 8020/8031...

  • Page 106: Specifying Account Settings

    If the “Copy Track Mode” setting is changed (to either “Yes” or “No”), all “Copy Track Data” counters are erased. If you wish to keep a record of the “Copy Track Data” counters, print them out before changing the “Copy Track Mode” setting. Press the [UTILITY] key. Touch [Admin. Mode]. Konica 8020/8031 5-63...
  • Page 107 Touch [Yes] to select the “Copy Track Mode” parameter. To select the “Job Skip” setting, touch [Yes], and then touch [Enter]. (Default setting: Yes) To cancel the “Copy Track Mode” parameter, touch [No]. The Initial Data screen appears. 5-64 Konica 8020/8031...
  • Page 108 If you do not wish to initialize the “Copy Track Data” counters, touch [No], and then touch [Enter]. The Copy Track mode is not canceled, and the “Copy Track Data” counters are not initialized. Konica 8020/8031 5-65...

  • Page 109: To Print A "Copy Track Data" Counter

    The icon ( ) indicating that data is being sent appears. The print job is queued for printing. The “Copy Track Data” counter is printed. Touch [Cancel], and then touch [Enter]. Touch [Enter]. The Copy Track screen appears again. 5-66 Konica 8020/8031...

  • Page 110: To Initialize A "Copy Track Mode" Counter

    [Sel. Dept count reset]. A screen appears, allowing you to select the account number. Select the 3-digit account number for the desired account. To initialize the “Copy Track Data” counter for another account, continue selecting account numbers. Touch [Clear]. Konica 8020/8031 5-67...
  • Page 111 To initialize the “Copy Track Data” counter for all accounts, touch [All counter reset]. The Clear All Counters screen appears. Touch [Enter]. The “Copy Track Data” counter for all accounts are initialized. Touch [Enter]. The Copy Track screen appears again. 5-68 Konica 8020/8031...

  • Page 112: To Specify Settings For A "Copy Track Data" Counter

    For example, touch [1/20] for accounts 001 to 005. Touching displays accounts 006 through 010. Select the ID for the desired account. Determine the 4-digit access code for the account. ❍ Using the keypad, enter the access code. Konica 8020/8031 5-69...
  • Page 113 Using the keypad, enter the limit value. ❍ If the limit for full-color copies/printouts is set, the same limit is automatically set for “Mono Color”. Touch [Enter]. The specified limits are set. Touch [Enter]. The Copy Track screen appears again. 5-70 Konica 8020/8031...

  • Page 114: To Specify Permissions For An Account

    [Allow].) Note For example, if “Prohibit” appears below “Color” for account 001, the user of account 001 can make copies/printouts using the Color setting “Black”, but cannot use the Color setting “Full Color” or the “Monotone” function. Konica 8020/8031 5-71...
  • Page 115 Color setting “Black”, but cannot use the Color setting “Full Color” or the “Monotone” function. Touch [Enter]. The specified permissions are set. Touch [Enter]. The Copy Track screen appears again. 5-72 Konica 8020/8031...

  • Page 116: To Apply The Specified Limits

    “Inactivate” once. “Inactivate” changes to “Activate”. (Touch [Activate] once to change it back to [Inactivate].) Note The total limit for the account and for black and white and color cannot be set at the same time. Konica 8020/8031 5-73...
  • Page 117 To apply the limit to all accounts, touch [Same for All Dept.], and then touch [Inactivate] once for account 001. The specified limits will apply to all accounts. Touch [Enter]. The specified limits are applied. Touch [Enter]. The Copy Track screen appears again. 5-74 Konica 8020/8031...

  • Page 118: Touch Panel Messages

    Touch Panel Messages...

  • Page 119: When The Message "Toner Cartridge (X) Needs To Be Replaced Soon." Appears

    The number of copies that can be made from the time that the message appears warning that the toner is almost empty until the time that the message appears indicating that the toner is empty differs depending on the specified copy settings. Konica 8020/8031...

  • Page 120: When The Message "Replace The Toner Cartridge" Appears

    Do not replace the toner cartridge until the message indicating that it be replaced appears in the touch panel. In addition, do not replace the toner cartridge of any color other than the one indicated in the message on the touch panel. Konica 8020/8031...
  • Page 121 If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention. CAUTION Used toner cartridges ➜ Do not throw away the used toner bottle. Keep it in the shipping box to be collected by your authorized service representative. Konica 8020/8031...

  • Page 122: To Replace The Toner Cartridge

    Pull out the empty toner cartridge. Note Do not throw away the used toner bottle. Keep it in the shipping box to be collected by your authorized service representative. Konica 8020/8031...
  • Page 123 Peel off the tape. Note Slowly remove the tape attached to the toner cartridge. If the tape is removed with too much force, toner may spurt out. Konica 8020/8031...
  • Page 124 Remove the protective cap. Protective Position the toner cartridge as shown, and then insert it into its compartment. Turn the lever clockwise. Note Make sure that the lever is fully turned, as shown, otherwise the front door cannot be closed. Konica 8020/8031...
  • Page 125 Use only the lever of the charger-cleaning tool located below the new toner cartridge when using the charger-cleaning tool to clean the charger wire. If the door cannot be closed securely, the lever may not be in its correct position. Make sure that the lever is fully turned. Konica 8020/8031...

  • Page 126: When The Message "Replace Staple Cartridge." Appears

    If the staples are empty, appears in the screen on the touch panel. Touch to display the message shown in the following illustration. Note Be sure to replace the staple cartridge only after the message appears, otherwise the machine may be damaged. Konica 8020/8031...

  • Page 127: To Replace The Staple Cartridge For Fs-135

    To replace the staple cartridge for FS-135 Slide the finisher away from the copier. Turn the dial to the left in order to position the stapler at the center. Pull the staple holder out toward you. Stapler 6-10 Konica 8020/8031...
  • Page 128 Remove the empty staple cartridge. Insert the new staple cartridge into the staple holder, and then carefully pull out the stopper. Insert the refilled staple holder until it locks into place. Slide the finisher back against the copier. Konica 8020/8031 6-11...

  • Page 129: To Replace The Staple Cartridge For Fs-231

    Open the front door of the finisher. Turn misfeed-clearing dial clockwise until the removal indicator is completely blue. ❍ If the dial is turned too far, turn it counterclockwise to adjust it. 6-12 Konica 8020/8031...
  • Page 130 ❍ If the dial is turned too far, turn it counterclockwise to adjust it. Grasp both sides of the staple cartridge, lift up the staple cartridge, and then pull it out. Konica 8020/8031 6-13...
  • Page 131 6.3 When the Message “Replace Staple Cartridge.” Appears Press the button marked “PUSH” on the side of the staple cartridge. The staple case is released. Pull up the staple case. Remove the paper holder from the staple case. 6-14 Konica 8020/8031...
  • Page 132 6.3 When the Message “Replace Staple Cartridge.” Appears Refill the staple case with staples. ❍ Fully insert the staple case as far as possible. Press the staple case down. Peel off the tape from the staples. Konica 8020/8031 6-15...
  • Page 133 Fully insert the staple cartridge so that it locks into place. ❍ Check that the staple cartridge is firmly installed. Carefully move the stapler unit back into its original position. Close the front door. 6-16 Konica 8020/8031...

  • Page 134: When The Message "Misfeed Detected." Appears

    Locations of Paper Misfeeds in the Enlarge Display Mode If a paper misfeed occurs while the Enlarge Display mode is being used, the message shown in the following illustration appears. Touch to display a screen showing where paper may have been misfed. Konica 8020/8031 6-17...
  • Page 135 A paper misfeed in the large capacity tray (p. 6-24) A paper misfeed in finisher FS-135 (option tray) (p. 6-35) A paper misfeed in the duplex unit (p. 6-21) A paper misfeed in a paper drawer (p. 6-22) A paper misfeed in finisher FS-231 (p. 6-39) 6-18 Konica 8020/8031...

  • Page 136: To Clear A Paper Misfeed In The Manual Bypass Tray

    Decreased copy quality may result if the surface of the image transfer belt or the image transfer roller is touched. ➜ Be careful not to touch the surface of the Image transfer belt image transfer belt or the image transfer roller. Image transfer roller Konica 8020/8031 6-19...
  • Page 137 6.4 When the Message “Misfeed detected.” Appears Carefully pull out the paper. Close the right-side door. 6-20 Konica 8020/8031...

  • Page 138: To Clear A Paper Misfeed In The Duplex Unit

    A flashing “O” indicates the location of the paper misfeed. In addition, a lit “O” indicates areas where paper may have been misfed and that should be checked. Open the duplex unit door. Carefully pull out the paper. Close the duplex unit door. Konica 8020/8031 6-21...

  • Page 139: To Clear A Paper Misfeed In A Paper Drawer

    Open the right-side door of the paper drawer indicated by the “O”. Turn the green wheels to feed the paper so that it can be easily removed. 6-22 Konica 8020/8031...
  • Page 140 6.4 When the Message “Misfeed detected.” Appears Carefully pull out the paper. Close the lower right-side door. Pull out the paper drawer, and then remove any misfed paper. Close the paper drawer. Konica 8020/8031 6-23...

  • Page 141: To Clear A Paper Misfeed In The Large Capacity Tray

    Carefully pull out the paper. Close the right-side door of the large capacity tray. Pull out the paper drawer of the large capacity tray, and then remove any misfed paper. Close the paper drawer of the large capacity tray. 6-24 Konica 8020/8031...

  • Page 142: To Clear A Paper Misfeed In The Right-Side Door

    Load the paper in the drawer again, and then close the drawer. Note Be careful not to touch the surface of the paper take-up roller with your hands. Pull up the lock release lever to open the right-side door. Konica 8020/8031 6-25...
  • Page 143 Decreased copy quality may result if the surface of the image transfer belt or the image transfer roller is touched. ➜ Be careful not to touch the surface of the Image transfer belt image transfer belt or the image transfer roller. Image transfer roller 6-26 Konica 8020/8031...
  • Page 144 The paper that was removed tore and remains in the fusing unit. Pull out any paper caught in the fusing unit. Open the right-side door, and then make sure that there is no paper in the fusing unit. Konica 8020/8031 6-27...

  • Page 145: To Clear A Paper Misfeed In The Upper Right-Side Door

    Grasp the upper right-side door as shown, and then carefully open the door completely while making sure to support it. Note Be sure to support the door while carefully opening it, otherwise it may be damaged. 6-28 Konica 8020/8031...
  • Page 146 If you get burned, immediately cool the skin under cold water, and then seek professional medical attention. Grasp the tab on the left end of the fusing unit cover, and then swing the cover toward you to open it. Konica 8020/8031 6-29...
  • Page 147 The paper that was removed tore and remains in the fusing unit. Grasp the tab on the left end of the fusing unit cover, and then return the cover to its original position. Close the upper right-side door. Close the right-side door. 6-30 Konica 8020/8031...

  • Page 148: To Clear A Paper Misfeed In The Duplexing Document Feeder

    Open the left-side misfeed- clearing cover. Carefully pull out any documents from the document feed tray. Open the right-side misfeed- clearing cover. Turn the dial counterclockwise to feed out any documents. Carefully pull out any documents. Konica 8020/8031 6-31...
  • Page 149 Guide Carefully pull out the documents. Carefully open the duplexing feed guide as far as possible. Check that the guide remains securely open. Turn the dial to feed out any documents. Carefully pull out any documents. 6-32 Konica 8020/8031...
  • Page 150 Close the duplexing feed guide. Open the duplexing document feeder, and then carefully pull out any documents. Remove any documents on the platen glass, and then close the duplexing document feeder. Close the left-side and right-side misfeed-clearing covers. Konica 8020/8031 6-33...
  • Page 151 6.4 When the Message “Misfeed detected.” Appears Reload the documents according to the instructions that appear on the touch panel. 6-34 Konica 8020/8031...

  • Page 152: To Clear A Paper Misfeed In Finisher Fs-135

    Slide the finisher away from the copier. Open the horizontal transport unit cover, and then remove any paper. Close the horizontal transport unit cover. Konica 8020/8031 6-35...
  • Page 153 6.4 When the Message “Misfeed detected.” Appears Open front door FN4. Turn knobs FN5 clockwise at the same time. While holding the misfeed-clearing guide FN7 open, pull out any paper. 6-36 Konica 8020/8031...
  • Page 154 Metallic parts on the inside of upper cover FN1 are very hot. ➜ Touching anything other than the paper within the area around the fusing unit may result in burns. While holding misfeed-clearing guide FN2 open, pull out any paper. Konica 8020/8031 6-37...
  • Page 155 16. If the Option tray is installed: Open the Option tray. Remove any misfed paper. Close the Option tray. While holding misfeed-clearing guide FN6 open, pull out any paper. Slide the finisher back against the copier. 6-38 Konica 8020/8031...

  • Page 156: To Clear A Paper Misfeed In Finisher Fs-231

    Slide the finisher away from the copier. Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. Konica 8020/8031 6-39...
  • Page 157 Open the upper door of the finisher, and then pull out any paper in the feed section. Close the upper door. 6-40 Konica 8020/8031...
  • Page 158 Pulling out the paper with too much force may damage the folding unit. If the paper cannot be pulled out easily, turn the misfeed-clearing dial in the folding section as described in the following step, and then pull out the paper. Konica 8020/8031 6-41...
  • Page 159 Close the front door of the finisher. Note Be careful that your fingers are not pinched when the front door is closed. Slide the finisher back against the copier. 6-42 Konica 8020/8031...

  • Page 160: When The Message "Staple Mode Cannot Be Used." Appears

    When a finisher is installed and the staples are jammed, the message shown below appears. Follow the procedure below to clear the jammed staples. Slide the finisher away from the copier. Turn the dial to the left in order to position the stapler at the center. Konica 8020/8031 6-43...
  • Page 161 Move the guide back to its original position. Insert the staple holder until it locks into place. Slide the finisher back against the copier. Note If stapling still cannot be performed, even after performing the above procedure, contact your authorized service representative. 6-44 Konica 8020/8031...

  • Page 162: To Clear Jammed Staples In Fs-231

    If the message “Staple mode cannot be used.” appears, be sure to perform the following procedure. If the paper is pulled out in any way other than that described below, the stapler unit may be damaged. Slide the finisher away from the copier. Konica 8020/8031 6-45...
  • Page 163 Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. Open the feed guide for the finisher, and then remove any paper. Open the front door of the finisher. 6-46 Konica 8020/8031...
  • Page 164 Pulling out the paper with too much force may damage the folding unit. If the paper cannot be pulled out easily, turn the misfeed-clearing dial in the folding section as described in the following step, and then pull out the paper. Konica 8020/8031 6-47...
  • Page 165 The staple cartridge moves to a position from where it can be removed. ❍ If the dial is turned too far, turn it counterclockwise to adjust it so the cartridge removal indicators are aligned. 6-48 Konica 8020/8031...
  • Page 166 Pull out toward you the two staples jammed at the end of the staple cartridge. Note Be sure to remove two staples, otherwise stapling cannot continue correctly. Return the shutter of the staple cartridge to its original position. Konica 8020/8031 6-49...
  • Page 167 Fully insert the staple cartridge so that it locks into place. ❍ Check that the staple cartridge is firmly installed. Carefully move the stapler unit back into its original position. Close the front door. Slide the finisher back against the copier. 6-50 Konica 8020/8031...

  • Page 168: When The Message "Remove Punch Scraps." Appears

    Display in Enlarge Display Mode If the hole-punch waste container is full, appears in the screen on the touch panel. Touch to display a message (if it can be emptied by the user). Konica 8020/8031 6-51...

  • Page 169: To Empty The Hole-Punch Waste Container

    Empty the hole-punch waste container, and then re-install it according to the following procedure. Slide the finisher away from the copier. Pull out the hole-punch waste container. Empty the container. Insert the hole-punch waste container into its original position. Slide the finisher back against the copier. 6-52 Konica 8020/8031...

  • Page 170: When The Inspection Mark " " Appears

    Display in Enlarge Display Mode If an error occurs during image stabilizing, printing or scanning, appears in the screen on the touch panel. Touch to display the message shown in the following illustration. Contact your authorized service representative for information. Konica 8020/8031 6-53...

  • Page 171: Display In Enlarge Display Mode

    When contacting the service representative, inform them of the numbers (“P-7” for the example below) listed in the screen that appears. Touching [Exit] in the top-right corner displays the Basic screen again. Display in Enlarge Display Mode 6-54 Konica 8020/8031...

  • Page 172: When The Message "Malfunction Detected." Appears

    When the Malfunction detected screen is displayed, be sure to contact your authorized service representative immediately by following the procedure below. Make note of the code No. (“C-0200” for the example) in the screen that appears. Turn OFF the power switch. Unplug the machine. Konica 8020/8031 6-55...
  • Page 173 6.8 When the Message “Malfunction detected.” Appears Contact your authorized service representative and report the condition and code No. 6-56 Konica 8020/8031...

  • Page 174: When The Message "Xxxx Needs To Be Replaced Soon." Appears

    The number of copies that can be made from the time that the message appears warning that the part/supplies should soon be replaced until the time that the message appears indicating that the part/supplies should be replaced differs depending on the specified copy settings and the part/supplies. Konica 8020/8031 6-57...

  • Page 175: When The Message "Replace Xxxx." Appears

    When the message appears, replace the specified supplies or part according to your maintenance agreement. Please Be Reminded ! Used supplies or part ➜ Do not throw away the used supplies or parts. Keep it in the shipping box to be collected by your authorized service representative. 6-58 Konica 8020/8031...

  • Page 176: Other Messages

    Replace the toner cartridge replaced soon. is about to run out. according to your maintenance agreement. Toner X is empty. Since the toner for the indicated color has run out, the copier is unable to make copies. Konica 8020/8031 6-59...
  • Page 177 Inform your service Call your Service Rep. and unable to make copies. representative of the code provide code: displayed on the touch panel. If any message other than those listed above appears, perform the operation described in the message. 6-60 Konica 8020/8031...

  • Page 178: Troubleshooting

    Troubleshooting...

  • Page 179: When The Print Quality Is Poor

    If a thin double-sided document being copied. is being copied, the information on the back side may be reproduced in the copy. Select a lighter setting for the “Background” parameter. (See section 5.8 in the Basic Operations volume.) Konica 8020/8031...
  • Page 180 (See p. 8-8) feeder). The document guides are not Slide the document guides positioned along the edges of against the edges of the paper. the paper. Curled paper was loaded into Flatten the paper before loading the paper drawer. Konica 8020/8031...

  • Page 181: When The Copier Is Not Operating Correctly

    The copier cannot be turned on. The power supply cord may Plug the power supply cord into have been unplugged from the an electrical outlet. electrical outlet. The room’s circuit breaker was Close the room’s circuit tripped. breaker. Konica 8020/8031...

  • Page 182: Appendix

    Appendix...

  • Page 183: Specifications

    8.1 Specifications Specifications Copier Konica 8020/8031 Specification Type Desktop Platen Stationary Photo conductor Copying system Dry-type electrophotographic method Developing system Dry, 2-component magnetic brush developing Fusing system Belt-fixing Scanning: 600 dpi, Printing: 600 dpi × 1800 dpi equivalent Resolution Document...

  • Page 184: Duplex Unit Ad-231

    Specification Copy speed Full color/Black: (Konica 8031) For A4 C paper loaded into the 2nd drawer: 31/31 sheets/min. For B4 L paper loaded into the 2nd drawer: 18/18 sheets/min. For A3 L paper loaded into the 2nd drawer: 15/15 sheets/min.

  • Page 185: Duplexing Document Feeder Df-332

    — — — B5 C — — — — A4 L — — A5 C — — — — B5 L — — — A5 L — — — — — — 2: Available : Not Available — Konica 8020/8031...

  • Page 186: Paper Feed Unit Pf-232

    Paper output tray: “Non-sort” setting: A4 L/C, A3 L, A3 Wide L “Sort” setting: A4 L/C, A3 L “Sort”/“Staple” setting: A4 L/C, A3 L “Punch” setting: A4 C, A3 L Lower paper output tray: A4 L, A3 L Konica 8020/8031...

  • Page 187: Finisher Fs-135

    ): Maximum 1,000 sheets A4 L-size paper or smaller; Maximum 500 sheets B4 L-size paper or larger “Staple” setting Paper size: A3 L, A4 L/C Number of sheets bound: 2 to 30 sheets (2 to 20 sheets with densely printed paper) Konica 8020/8031...

  • Page 188: Option Tray

    Plain paper (64 to 90 g/m Paper size A4 L/C, A3 L Paper capacity A4 C: 100 sheets, Except A4 C: 50 sheets 341 mm (width) × 527 mm (depth) × 149 mm (height) Dimensions Weight About 1.8 kg Konica 8020/8031...

  • Page 189: Care Of The Copier

    Housing cover ➜ Clean the surface of the housing cover by wiping it with a soft cloth dampened with a mild household detergent. Platen glass ➜ Clean the platen glass by wiping it with a soft, dry cloth. Konica 8020/8031...

  • Page 190: Operation Panel

    Clean the newly exposed surface of the belt by wiping it with a soft cloth dampened with a mild household detergent (as in step 1). Repeat the above steps until the entire surface of the document transfer belt has been wiped clean. Konica 8020/8031...

  • Page 191: Paper Take-Up Roller

    Open the front door. Pull out and push in the charger- cleaning tool several times. Perform the same step on each of the four charger-cleaning tools that are installed. Securely insert each charger-cleaning tool, and then close the front door. 8-10 Konica 8020/8031...

  • Page 192: Function Combination Table

    8.3 Function Combination Table Function Combination Table Konica 8020/8031 8-11...
  • Page 193 8.3 Function Combination Table 8-12 Konica 8020/8031...
  • Page 194 8.3 Function Combination Table Konica 8020/8031 8-13...
  • Page 195 8.3 Function Combination Table 8-14 Konica 8020/8031...
  • Page 196 8.3 Function Combination Table Konica 8020/8031 8-15...
  • Page 197 8.3 Function Combination Table 8-16 Konica 8020/8031...

  • Page 198: Function Combination Table

    Enhancement” function (38) are maintained, even if all modes and function are returned to their default settings using the “Auto Panel Reset” function. For example, set the “Text Enhancement” function (38) to “+3 (Darker)” while the “Text” setting (32) is selected. Then, select a Photo/Density setting that the Konica 8020/8031 8-17...
  • Page 199 Another function cannot be selected while a test print is being printed. When a test print is printed, the mode returns to the one before the test print was performed. The paper drawer is selected according to the priority order. 8-18 Konica 8020/8031...

  • Page 200: Paper Size And Zoom Ratio Tables

    8 in. × 10 in. 203 mm × 254 mm Quarto 5-1/2 in. × 8-1/2 in. 140 mm × 216 mm Statement Invoice 4 in. × 6 in. 4 in. × 6 in. 102 mm × 152 mm Konica 8020/8031 8-19...

  • Page 201: Zoom Ratios

    257 mm × 364 mm × 0.577 10 in. × 14-1/4 in. × 0.707 × 0.500 × 1.154 × 0.816 182 mm × 257 mm × 0.577 7-1/4 in. × 10 in. × 0.707 × 1.640 × 1.154 × 1.414 8-20 Konica 8020/8031...
  • Page 202 × 1.294 11 in. × 14 in. × 1.076 × 0.647 Letter Invoice 8-1/2 in. × 11 in. 11 in. × 17 in. × 1.294 215.9 mm × 279.4 mm 11 in. × 14 in. × 1.272 Konica 8020/8031 8-21...
  • Page 203 11 in. × 14 in. × 1.647 139.7 mm × 215.9 mm × 1.545 Legal × 1.529 × 1.294 Letter Zoom ratio = Paper size/Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) 8-22 Konica 8020/8031...

  • Page 204: Consumables

    Note Only use toner that has been manufactured specifically for this copier. Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your authorized service representative. Konica 8020/8031 8-23...

  • Page 205: Staple Cartridges

    8.5 Consumables Staple Cartridges FS-135 Staples for staple binding 3,000 staples are provided in the staple cartridge. FS-231 Staples for staple binding 5,000 staples are provided in the staple cartridge. 8-24 Konica 8020/8031...

  • Page 206: Index

    Index...
  • Page 207 Centering ..................5-31 Confirmation beep ................5-10 Control panel ..................4-6 Copier ....................4-2 Copier stand ..................4-3 Copy desk ................... 4-2 Copy program ................5-5 Copy table ................... 4-3 Copy track ..................5-60 Criss cross mode ................5-25 Konica 8020/8031...
  • Page 208 Front door ....................4-5 Function combination table ..............8-11 Fusing unit ...................4-8 Gradation adjust ................5-56 Hard disk .....................4-4 Image transfer belt unit ................4-8 Image transfer roller unit ..............4-8 Imaging unit ..................4-8 Initial mode ..................5-4 Input .....................5-3 Installation site ..................3-2 Intelligent sorting ................5-24 Konica 8020/8031...
  • Page 209 Finisher FS-135 ................6-35 Finisher FS-231 ................6-39 Large capacity tray ..............6-24 Manual bypass tray ..............6-19 Paper drawer ................6-22 Right-side door ................6-25 Upper right-side door ..............6-28 Paper orientation ................. 1-5 Paper sizes ..................8-19 Konica 8020/8031...
  • Page 210 Specialty paper settings ..............5-21 Specifications ..................8-2 Stabilizer ....................5-58 Staple cartridge replacement FS-135 ..................6-10 FS-231 ..................6-12 Staple jam clearing FS-135 ..................6-43 FS-231 ..................6-45 Thick paper and OHP film image density ..........5-41 Toner cartridge ................4-8 8-23 Top erase ..................5-36 Troubleshooting ...................7-2 Konica 8020/8031...
  • Page 211 9.1 Index Unit life indicator ................5-34 Upper right-side door ................4-9 User’s choice: 1 .................. 5-7 User’s choice: 2 .................. 5-9 Utility ....................5-2 Waste-toner bottle ................4-8 Zoom ratios ..................8-20 Konica 8020/8031...
  • Page 212 MANUFACTURER • • TOKYO JAPAN 4581-7735-12 Printed in Japan 2003. 04 2...

This manual is also suitable for:

8020

Table of Contents