Practical Copy Examples; To Make A Copy That Is The Same Size As The Original - Konica Minolta 8020 User Manual

2
2.2

Practical Copy Examples

Examples of various basic copy operations are described below.
Refer to the following procedures for details on performing the various copy operations.
Note
These explanations assume that all functions, such as those available on the Utility screen, are set to
their default settings.
If any function has been customized, it may not be possible to perform the operations as described
below.

To make a copy that is the same size as the original

An example for making one single-sided copy that is the same size as the single-sided original is de-
scribed below.
Load the document into the duplexing document feeder.
When loading the document, load it so that the side that you wish to copy faces up
and the top is toward the rear of the copier. Then, adjust the document guides to fit
the size of the document.
Touch [Paper].
Make sure that paper of the same size as the document is loaded into a paper
drawer.
Make sure that the number of copies is set to "1".
Press the [START] key. The copy job appears in the job display.
Copying is performed in the order that the job was programmed.
2-4
A A
2.2 Practical Copy Examples
Konica 8020/8031