Chapter 2 Startup; Setup - Kurzweil PC2R Musician's Manual

Chapter 2
Startup

Setup

During operation, the PC2R must be either installed in a properly-ventilated MIDI rack, or
resting on its four rubber feet on a sturdy, level surface. If not properly ventilated, the PC2R
could overheat and malfunction.
Figure 2-1 shows the bottom panel of the PC2R and the recommended locations for the rubber
feet. Peel the backing paper from each rubber foot and attach it as indicated.
Attach feet here
Figure 2-1 Attaching rubber feet
2-1