Kurzweil PC2R Musician's Manual page 116

Descriptions of Parameters
MIDI Receive Mode Parameters
Channel Number
This is the first parameter in the menu. Select this parameter and use the Alpha Wheel to select
the top of the list of parameters for a different MIDI channel.
Channel Activation (No parameter name shown)
Activates/deactivates current channel. The value is either On or Off.
Program ID and Name (No parameter name shown)
Specifies a program for the current channel. Changing the value changes the program in the
current zone (if the zone's destination includes MIDI, it transmits the program change to the
PC2R's MIDI Out port as well).
Volume (Vol)
Sets the volume level for the current channel. Transmits a MIDI Volume (7) message of the same
value to the MIDI Out port.
Pan
Specifies the pan setting for the current channel. A value of 0 is full left; 64 is center; 127 is full
right. Transmits a MIDI Pan (10) message of the same value to the MIDI Out port.
Effects Routing (Routing)
This sets the effects routing for any program playing on the current channel. This overrides the
effects routing of the program itself (but only while you're in MIDI Receive mode). Also
transmits a MIDI 94 message of the same value to the MIDI Out port.
A-to-B Wet/Dry Mix (Global A>B)
For all programs, specifies how much of the processed signal coming from FX-A goes to FX-B
and gets FX-B's effect applied to it. Also transmits a MIDI 92 message to the MIDI Out port.
FX-A Wet/Dry Mix (A)
For the current program on the current channel, specifies how much of FX-A's effect gets
applied to the dry signal coming from the PC2R's sound engine. Also transmits a MIDI 91
message to the MIDI Out port.
FX-B Wet/Dry Mix (B)
For the current program on the current channel, specifies how much of FX-B's effect gets applied
to the dry signal coming from the sound engine. Also transmits a MIDI 91 message to the MIDI
Out port
5-34