Adjusting Basic Position Of Clutch Lever; Checking The Fluid Level Of Hydraulic Clutch; Changing The Hydraulic Clutch Fluid - KTM 65 XC 2009 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting basic position of clutch lever

9.43

Checking the fluid level of hydraulic clutch

9.44
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.

Changing the hydraulic clutch fluid

9.45
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The fluid level rises with increasing wear of the clutch lining disc.
–
Adjust the basic setting of the clutch lever to the size of your child's hand by turn-
ing the adjusting screw
Info
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between
the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
700393-11
Do not make any adjustments while riding!
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top level of container
» If the level of the fluid does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
700419-01
Hydraulic fluid (15) (
–
Position the cover with the diaphragm. Mount and tighten the screws.
x
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
300669-10
–
Fill bleeding syringe
Bleed syringe (50329050000)
Hydraulic fluid (15) (
–
On the slave cylinder, remove the bleeder screw and mount bleeding syringe
300670-10
.

.

with diaphragm .
 
4 mm (0.16 in)
p. 68)
.

with diaphragm .
 
with the appropriate hydraulic fluid.

p. 68)
35
.
