Removing The Lower Triple Clamp; Installing The Lower Triple Clamp - KTM 65 XC 2009 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the lower triple clamp

9.23

Installing the lower triple clamp

9.24
2 0 0 2
1 0 0 1
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the brake line. Mount clamp
–
Mount the screws
700433-01
x
–
Remove the fork legs.
–
Dismount the start number plate. (
–
Dismount the front fender. (
–
Remove fuel tank breather
–
Remove screw
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
Do not bend the cables and lines.
300666-10
–
Remove protector ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
300667-10
x
–
Clean the bearing and sealing elements, check for damage, and grease.
Long-life grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Info
Check whether the top steering head seal
–
Push on protective ring
300668-01
M6
.

.

( p. 26)
x
p. 30)
p. 29)
.

. Remove screw , take off top triple clamp with the handlebar
 
.

p. 70)
.

.

10 Nm (7.4 lbf ft)
is correctly positioned.

28