Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork; Vehicle Level - KTM 65 XC 2009 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting the compression damping of the fork

9.11
Info
The hydraulic compression damping determines the fork suspension behavior.

Adjusting the rebound damping of the fork

9.12
Info
The hydraulic rebound damping determines the fork suspension behavior.

Vehicle level

9.13
–
Turn adjusting screw
Info
Adjusting screw
labeled with a C.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
700450-01
Standard
Info
Turn clockwise to increase damping, turn counterclockwise to reduce sus-
pension damping.
–
Turn adjusting screw
Info
Adjusting screw
labeled with an R.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
700451-01
Standard
Info
Turn clockwise to increase damping, turn counterclockwise to reduce sus-
pension damping.
Warning
Danger of accidents Modifications to the suspension settings can seriously alter
the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride
behavior.
The vehicle level at the front can be adjusted via the fork legs clamp.
The fork overhang can be individually adjusted to the size of the child. The fork should
be pushed through no further than position
700533-01
setting.
Upper triple clamp flush
with top position
Upper triple clamp flush
with 1st ring
Upper triple clamp flush
with 2nd ring
Upper triple clamp flush
with 3rd ring
clockwise all the way.

is located at the top end of the left fork leg and is

10 clicks
clockwise all the way.

is located at the top end of the right fork leg and is

10 clicks
. Position


Standard



corresponds to the standard

23