5
5.4
Receiving selected faxes
Incoming faxes will only be received if the sender number is programmed
as a one-touch number in your fax machine and the station identification
has been correctly programmed.
The number of the calling machine is not a one-touch number?
The incoming fax transmission will be automatically stopped as soon as
RECEIVE appears in the display.
The incoming fax does not have a station identification?
The incoming call will be automatically stopped.
When the software switch 26 is set at 01 (ON), faxes can be received
selectively. The default setting is software switch 16 is 00 (OFF).
Please consult page 8-1 for detailed information concerning the use of
software switches.
5-4
MF 1100
Receiving faxes
Rev. 1.1.1/07.06.99