Table of Contents
Advertisement
Setting specific features
8
Setting specific features
8.1
Using software switches
Setting the software switches
Adjusting the fax machine to your requirements via software switches.
1
Press the [MENU] key six
times. Confirm your choice
via the [SET] key.
2
Press the [MENU] key twice.
Confirm your choice via the
[SET] key.
3
Enter the software switch code (e.g.
55) via the numerical keys. Confirm
your choice via the [SET] key.
4
Enter the code of the required
feature, e.g. 01 (90%).
5
Press the [SET] key.
The setting is now programmed.
6
Press the [STOP] key twice to
return to the standard display.
Cancelling a programming procedure!
Press the [STOP] key numerously when necessary to cancel a started
programming procedure.
Rev. 1.1.1/07.06.99
6: FAX SET-UP ?
3: FEATURE SW. ?
( 5 5 ) Rx. RATIO
90%
08 06. '99 15:32
MF 1100
8
( 0 1 )
8-1
Advertisement
Table of Contents
