Using Password Protection; Enabling The Password (System Administrators Only) - Paxar 610 User Manual

3. Press Enter / Pause. If you have not printed any labels, the message "No data! Press
Enter" appears. You will also see the "No data! Press Enter" message if you are using
continuous (non-indexed) supplies.
If you have printed labels since turning on the printer, you will see
The Len listing is the length of the loaded supply in dots.
The Max listing should always be greater than the Min listing. The OK listing tells whether
the sense mark on the supply passed a detection test. Press
readings.

Using Password Protection

The password protection feature prevents formats, graphics or fonts from accidentally
being deleted from the printer's memory.

Enabling the Password (System Administrators only)

A System Administrator can enable the password that must be entered before formats,
graphics or fonts can be deleted.
1. From the Main Menu, press
2. Press Enter / Pause. You will see
3. Enter the password: press Feed / Cut three times and then press Enter / Pause.
If you enter the wrong password, you return to the Main Menu.
72 • 8. Diagnostics
Len Min Max OK
1568 034 124 Y
or until you see
MAIN MENU
Diagnostics
Enter Password
__ __ __ __ __ __
or to see the other
Users Manual - 610 / 611 / 612 Printers