Print Position - Paxar 610 User Manual

3. Press or
Enter / Pause. Press Escape / Clear twice to exit to the Main menu.

Print Position

This function adjusts where data prints vertically on the supply. Adjust the print if it is too
close to the top or bottom of the supply, or overtypes the pre-printed area. One dot is
0.0049 inch.
♦ If the data is too close to the bottom, increase the number.
♦ If the data is too close to the top, decrease the number.
To change the setting, from the Main Menu, select Setup, then Supply, then Positioning.
Then, follow these steps.
1. Press or until you see
Users Manual - 610 / 611 / 612 Printers
• 31
to see the other option. After you display the option you want, press
__________
Changing this setting only affects
new formats sent to the printer.
__________
Positioning
Print Pos
3. Setting Supply Options