Setting Supply Options; Ribbon - Paxar 610 User Manual

3. Setting Supply Options

This chapter explains how to select a ribbon, separators, feed mode, print position, supply
position, margin position, cut position, supply type, speed, and backfeed.
You may need to set supply options when you change supplies. The options are listed in
the table below.
Option

Ribbon

Separators
Feed Mode
Print Position
Supply Position
Margin Position
Cut Position
Supply Type
Speed
Backfeed
Verifier
To exit an option without changing the setting, press Escape / Clear.
Ribbon
You have to tell the printer if your supplies require a ribbon. To change the setting, from
the Main Menu, select Setup, then Supply. Then, follow these steps.
1. Press or until you see
2. Press Enter / Pause to set the ribbon option. You will see the current setting, for
example:
Users Manual - 610 / 611 / 612 Printers
• 29
Choices
No / Yes / High Energy
No / Yes / Long
Continuous / On-Demand
-99 to +99
-300 to +300
-99 to +99
-300 to +300
Aperture / Die Cut / Black Mark /
Continuous
2.5 / 4.0 / 6.0 / 8.0 / 10.0 / Default
Off / On / Extended
Disabled / Enabled
SUPPLY
Ribbon
Default
Yes
No
Continuous
0
0
0
0
Die Cut
Default
Off
Disabled
3. Setting Supply Options