3. Press
or
press Enter / Pause. Press Escape / Clear twice to exit to the Main menu.
Batch Separators
The 610 / 611 / 612 printers do not support Batch Separators. Paxar strongly recommends
leaving to Batch Separator selection to "NO".
Feed Mode
You can use continuous or on-demand printing. On-demand printing allows you to remove
a label before printing the next one.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press
or
2. Press Enter / Pause to set the feed mode. You will see the current setting, for
example:
30 • 3. Setting Supply Options
to see the other options. After you display the option you want,
__________
If you set the Ribbon option to Yes, install
a ribbon before printing.
If you want to use a high energy ribbon,
select high energy for the ribbon
every time the printer is turned on.
__________
until you see
FEED MODE
Continuous
SUPPLY
Yes
SUPPLY
Feed Mode
Users Manual - 610 / 611 / 612 Printers