Preventing Jams
To prevent jams
♦ Design formats using the appropriate non-print zones.
♦ Do not leave the printhead closed (in the locked position) longer than 30 minutes
without printing. Open (unlock) the printhead before a break period, at the end of
each shift, and at the end of each day.
Printing Serial Bar Codes
Currently, the 610 / 611 / 612 printer does not support printing serial (ladder) bar codes.
Parallel (Picket Fence) Bar Code
Adjusting the Cut Angle
To adjust the cut angle:
1.
Loosen the thumbscrews.
2.
Slightly rotate the knife to the left or to the right. The knife may appear to sit at a
slight angle to the printer.
3.
Tighten the thumbscrews.
Cut another batch of tags. If you are unable to adjust for a straight cut, call Technical
Support.
Users Manual - 610 / 611 / 612 Printers
Serial (Ladder) Bar Code
6. Printing • 57