Checking Supply Quality - Paxar 610 User Manual

3. Press Enter / Pause. The following test labels print.
The first label shows the printer's configuration by packet (A-G). The second label shows
the model number, software version, stock count, voltage, print contrast, printhead
resistance, number of bad dots, and installed options. The test label also shows an inch
count for the high energy ribbon. This information will help Technical Support diagnose the
problem. Refer to the optional Packet Reference Manual for more information about the
test label.
You can also print a test label by pressing
second and release. If test labels do not print, call Technical Support.

Checking Supply Quality

The printer continuously stores data from the most recent 16 supplies printed to check the
reflectivity of the sensor marks on the supply. Before you check your supply quality, print a
batch of supplies or test labels.
1. From the Diagnostics menu, press
2. Press Enter / Pause. You will be at the User Diagnostics menu. Press
you see
Users Manual - 610 / 611 / 612 Printers
Test Label
and at the same time. Hold for one
or until you see
DIAGNOSTICS
User Diag
USER DIAG
Supply Quality
or until
8. Diagnostics • 71