Default Serial Port Communication Values; Default Printer Settings; Using The Control Panel; Printer Status Lights - Paxar 610 User Manual

Default Serial Port Communication Values

If you are communicating with the host through the serial port, make sure the printer's
communication values match those at the host. The factory default values are: 9600-Baud,
8 bit data frame Word Length, 1 Stop Bit, no Parity, and XON / XOFF Flow Control.
To change the printer's communication values, ask your System Administrator or see
"Communication Values" for more information.

Default Printer Settings

These defaults can be changed using Paxar's PCMate software. Print Speed - 4.0 ips
(inches per second), Ribbon - High Energy, Supply Type - Black Mark, Contrast - 255,
Backfeed - Enabled, Dispense Position - 120 dots, Backfeed Distance - 110 dots.

Using the Control Panel

The control panel has a two-line LCD display, 2 status lights, and five buttons. The control
panel displays error codes / messages, and allows you to setup-configure the printer.

Printer Status Lights

Power: The printer shows a steady
green light when it is on.
Fault: The printer shows a blinking
amber light when there is a
printer error.
8 • 1. Getting Started
Users Manual - 610 / 611 / 612 Printers