Verifier; Setting Contrast - Paxar 610 User Manual

1. Press or
2. Press Enter / Pause to set the backfeed option. You will see the current setting, for
example:
3. Press or
Enter / Pause. Press Escape / Clear twice to exit to the Main menu. You can only
enable or disable backfeed / extended backfeed. You cannot set the backfeed or
dispense position. Your System Administrator should refer to the optional Packet
Reference Manual to set the backfeed or dispense position.

Verifier

The 610 / 611 / 612 printers do not support the use of a verifier. Leave the verifier setting
at "Disabled".

Setting Contrast

The print contrast controls the darkness of the printing on your supply. The range is -390 to
+156 and the default is 0. You may need to increase the print contrast for linerless
supplies. Having the correct print contrast setting is important because it affects how well
your bar codes scan and how long your printhead lasts. You can use a verifier to check the
bar code print quality.
1. From the Main Menu, press
Users Manual - 610 / 611 / 612 Printers
• 37
until you see
to see the other options. After you display the option you want, press
If you set the contrast by turning the
knob on the back of the printer, this
contrast setting is added to it.
or
MAIN MENU
SUPPLY
BACKFEED
On
__________
__________
until you see
Setup
3. Setting Supply Options