Speed; Backfeed - Paxar 610 User Manual

Speed

You can change the print speed for bar codes or graphics. If you select "default" for speed,
formats with serial bar codes automatically print at 2.5IPS and formats with parallel bar
codes print at 6.0 ips. 10 ips printing is only available using thermal direct labels in
continuous mode.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press or
2. Press Enter / Pause to set the speed option. You will see the current setting, for
example:
3. Press or
Enter / Pause. Press Escape / Clear twice to exit to the Main menu.

Backfeed

Backfeed works by advancing each printed label to the desired dispense position. Once
that label is removed, the next label to be printed is backed up underneath the printhead.
In continuous mode, only the last label in the batch is advanced to the dispense position.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
36 • 3. Setting Supply Options
until you see
to see the other options. After you display the option you want, press
For additional high speed printing
information, see Chapter 6, "Printing."
SUPPLY
Speed
SPEED
Default
__________
__________
Users Manual - 610 / 611 / 612 Printers