4. Communication Values
This chapter tells you how to set the serial or parallel communication values. These values
provide the link for normal online printing.
You need to set your Serial Comm values to match your computer's online
communications. Before entering the communication values, see your System
Administrator.
The serial communication values are listed in the table below.
Option
Baud rate
Word length
Stop bits
Parity
Flow control
Reset
Baud Rate
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm.
Then, follow these steps:
1. Press
or
2. Press Enter / Pause. You will see the current setting, for example:
3. Press
or
Escape / Clear three times to exit to the Main Menu.
Users Manual - 610 / 611 / 612 Printers
Choices
1200 / 2400 / 4800 / 9600 / 19200 /
38400 / 57600 / 115200
7 / 8
1 / 2
None / Odd / Even
None / XON - XOFF / DTR - CTS
No / Yes
until you see
SERIAL COMM
BAUD RATE
to display the baud rate you need, then press Enter / Pause. Press
Baud Rate
9600
Default
9600
8
1
None
DTR
No
4. Communication Values • 39