Programming The Mmsi - Standard Horizon Explorer GPS GX1700 Owner's Manual

How can I obtain an MMSI assignment?
In the USA, visit the following websites to register:
http://www.boatus.com/mmsi/ or
http://seatow.com/boating_safety/mmsi.asp
In the Canada, visit
http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf01032e.html or
http://www.usps.org/php/mmsi/rules.php

9.2.2 Programming the MMSI

A user MMSI can be inputted only once. Therefore please be
careful not to input the incorrect MMSI number. If you need to
change the MMSI number after it has been entered, the radio will
have to be returned to Factory Service. Refer to the section "16.2
FACTORY SERVICE."
1. Press and hold down the
" Setup Menu " appears.
2. Press the
SETUP ".
3. Press the
soft key.)
4. Press the
first number of your MMSI, then press the
soft key to step to the next number.
5. Repeat step 4 to set your MMSI number
(nine digits).
6. If a mistake was made entering in the MMSI
number, press the
the wrong number is selected, then press
the /
press the
7. When finished programming the MMSI number,
press and hold the
ask you to input the MMSI number again. Use
steps 4 - 6 above.
8. After the second number has been input, press
and hold the
9. Press the
GX1700
WARNING
/ key to select " MMSI
soft key. (To cancel, press the
/ key to select the
soft key until
key to correct the entry and
soft key.
soft key. The radio will
soft to store the MMSI.
soft key to return to radio operation.
key until the
GENERAL SETUP
CH Function Setup
DSC Setup
Waypoint Setup
GPS Setup
MMSI Setup
SELECT
Input User MMSI
---------
Input User MMSI
*********
Input Again
---------
-Setup Menu-
-Setup Menu-
General Setup
CH Function Setup
QUIT
DSC Setup
Waypoint Setup
GPS Setup
MMSI SETUP
SELECT
-User MMSI-
-User MMSI-
Input User MMSI
QUIT
ENT 123456789 BACK
ENT BACK
-User MMSI-
-User MMSI-
Input User MMSI
*********
ENT BACK QUIT
Input Again
123456789
ENT BACK
-User MMSI-
Stored ID
123456789
OK
QUIT
QUIT
QUIT
Page 37