Waypoints; Marking A Position - Standard Horizon Explorer GPS GX1700 Owner's Manual

13 WAYPOINTS

The GX1700 is capable of storing up to 100 waypoints and navigating to
them using the compass page.
In addition DSC distress calls with position or a position received from a an-
other DSC radio using DSC polling can be navigated to.

13.1 MARKING A POSITION

This feature allows the radio to mark the current position of the vessel.
1. Press and hold down the
up Menu " appears.
2. Press the
POINT SETUP ".
3. Press the
" WAYPOINT DIRECTORY " with the
key.
4. Press the
POSITION " with the
5. Press the
Name, by pressing the
first letter.
6. Press the
and to move to the second letter in the name.
7. Repeat step 5 and 6 until the name is shown.
Press the
ed.
8. Press and hold the
save the waypoint into memory.
9. Press the
One of the soft keys (refer to section "10.7 SOFT KEYS") may be as-
signed to Mark and when pressed will bring up the menu above.
GX1700
key until " Set-
/ key to select " WAY-
soft key, then select
soft key, then select " MARK
/ key.
soft key, then enter the Waypoint
/
soft key to store the first letter
soft key to skip a letter if need-
soft key two times to
soft key several times to return to radio operation.
NOTE
GENERAL SETUP
CH Function Setup
DSC Setup
Waypoint Setup
GPS Setup
MMSI Setup
SELECT
-Waypoint Setup-
/
WAYPOINT DIRECTORY
Display Range
Direction
SELECT
key to select the
-Setup Menu-
-Setup Menu-
General Setup
CH Function Setup
QUIT
DSC Setup
WAYPOINT SETUP
GPS Setup
MMSI Setup
SELECT
-Waypoint Directry-
MARK POSITION
Add
QUIT
Edit
Delete
SELECT
-Waypoint Input-
WPT Name:WPT 001
Position: -- --.---_
--- --.---_
ENT BACK
-Waypoint Input-
WPT Name:Fishing PT
Position: 33 36.520N
118 10.120W
ENT BACK
Page 85
QUIT
QUIT
QUIT
QUIT