Microphone - Standard Horizon Explorer GPS GX1700 Owner's Manual

7.3

MICROPHONE

PTT ( Push-To-Talk ) Switch
When in radio mode and the PTT
switch pressed, the transmitter is
enabled for voice communications
to another vessel.
When a optional RAM3 second
station microphone is connected
and intercom mode is selected,
pressing the PTT switch enables
voice communications from the
GX1700 to the RAM3 second sta-
tion microphone.
/ Keys
The and
microphone function the same as the
panel of the transceiver.
Microphone
When spoken into transmits your voice with reduction of background
noise, using Clear Voice Noise Reduction Technology.
Be sure your mouth is about 1/2 inch (1.3 cm) from the mic hole
for best performance.
Key
The key on the microphone functions the same as the
the front panel of the transceiver.
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the
viously selected working channel.
Key
The key on the microphone functions the same as the
the front panel of the transceiver.
Press this key to toggle the transmit output power between 25 W (High)
and 1 W (Low) power.
GX1700
keys on the
NOTE
and keys on the front
key again reverts to the pre-
key on
key on
Page 27