Editing A Waypoint - Standard Horizon Explorer GPS GX1700 Owner's Manual

13.3 EDITING A WAYPOINT

This function allows a previously entered waypoint to be edited.
1. Press and hold down the
up Menu " appears.
2. Press the
POINT SETUP ".
3. Press the
" WAYPOINT DIRECTORY " with the
key.
4. Press the
with the
5. Press the
/ key to select the waypoint to be edited.
6. Press the
Input display.
7. Press the
number or letter is selected that is to be changed.
8. Press the
number.
9. Repeat step 7 and 8 until the waypoint is updated.
10. Press and hold the
edited waypoint into memory.
11. Press the
to radio operation.
GX1700
/ key to select " WAY-
soft key, then select
soft key, then select " EDIT "
/ key.
soft key, then press the
soft key to show the waypoint
soft key repeatedly until the
/ key to change the letter or
soft key several times to return
key until " Set-
/
soft key to store the
-Setup Menu-
GENERAL SETUP
CH Function Setup
DSC Setup
Waypoint Setup
-Setup Menu-
GPS Setup
General Setup
MMSI Setup
CH Function Setup
SELECT QUIT
DSC Setup
WAYPOINT SETUP
GPS Setup
-Waypoint Setup-
MMSI Setup
WAYPOINT DIRECTORY
SELECT
Display Range
Direction
-Waypoint Directry-
Mark Position
Add
SELECT QUIT
EDIT
Delete
SELECT
-Waypoint
Swim Point
FISHING PT
Port
SELECT
-Waypoint Input-
WPT Name:Fishing PT
ID:123456789
Position: 33 36.520N
118 10.120W
ENT BACK
-Waypoint Input-
WPT Name:Fishing PT
ID:123456789
Position: 33 35.670N
118 12.280W
ENT BACK
QUIT
QUIT
Directory -
QUIT
QUIT
QUIT
Page 87