Programming The Mmsi - Standard Horizon EXPLORER GX1600 Owner's Manual

How can I obtain an MMSI assignment?
In the USA, visit the following websites to register:
http://www.boatus.com/mmsi/ or
http://seatow.com/boating_safety/mmsi.asp
In the Canada, visit
http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf01032e.html or
http://www.usps.org/php/mmsi/rules.php

12.2.2 Programming the MMSI

A user MMSI can be inputted only once. Therefore please be careful
not to input the incorrect MMSI number. If you need to change the
MMSI number after it has been entered, the radio will have to be returned
to Factory Service. Refer to the section "18.2 FACTORY SERVICE."
1. Press and hold down the
"Setup Menu Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
2. Press the
SETUP SETUP SETUP".
SETUP SETUP
3. Press the [ SELECT ] soft key. (To cancel, press the
[ ENT ] soft key.)
4. Press the
number of your MMSI, then press the [ ENT ]
soft key to step to the next number.
5. Repeat step 4 to set your MMSI number (nine
digits).
6. If a mistake was made entering in the MMSI
number, press the [ BACK ] soft key until the
wrong number is selected, then press the
/ key to correct the entry and press the
[ ENT ] soft key.
7. When finished programming the MMSI number, press
and hold the [ ENT ] soft key. The radio will ask you to
input the MMSI number again. Use steps 4 - 6 above.
8. After the second number has been input, press and hold the CHANNEL
knob to store the MMSI.
9. Press the [ OK ] soft key to return to radio operation.
To view your MMSI after programming to ensure it is correct, perform
steps 1~3. Look that the MMSI number shown on the display is correct.
GX1600
FCC ID:K6630483X3D / IC:511B-30483X3S
WARNING
key until the
/ key to select "MMSI
/ key to select the first
NOTE
MMSI MMSI MMSI
MMSI
Vertex Standard Co., Ltd.
Page 37