Rear Panel - Standard Horizon Explorer GPS GX1700 Owner's Manual

7.2

REAR PANEL

RAM3 Connector ( Remote Station Microphone Connector )
Connects the GX1700 to the RAM3 ( CMP30 ) Remote Station Micro-
phone. Refer to section "15 RAM3 ( CMP30 ) REMOTE MIC OPERA-
TION" for details
DC Input Cable
Connects the radio to a DC power supply capable of delivering 11 to 16V
DC.
Accessory Connection Cable ( Green, Blue, Gray, & Brown )
Connects the GX1700 to a Chart Plotter or external GPS Antenna. Refer
to section "6.5 ACCESSORY CABLE".
External Speaker Connection Cable ( White & Shield )
Connects the GX1700 to an external speaker. See section "3 OPTIONS"
for a list of optional STANDARD HORIZON Speakers.
GND Terminal ( Ground Terminal )
Connecting a Ground wire to this connection will help reduce engine
noise when receiving and transmitting.
Use the screw supplied with the radio only.
ANT Jack ( Antenna Jack )
Connects an antenna to the transceiver. Use a marine VHF antenna with
an impedance of 50 ohms.
Page 26 GX1700