Station Name - Standard Horizon Explorer GPS GX1700 Owner's Manual

10.6 STATION NAME

This function allows you to change the name of the radio or RAM3 second
station microphone. Example: "Radio - Cabin", "RAM1 - Flybridge".
1. Connect the RAM3 second station microphone to
the GX1700.
2. Press and hold down the
Menu " appears, then select " GENERAL SETUP " with
the /
3. Press the
/ key to select " STATION NAME ".
4. Press the
5. Press the
or " RAM1 ") to be named, then press the
soft key.
6. Press the
letter of the new channel name.
7. Press the
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the
key to move to the next space. This method can
also be used to enter a blank space in the name.
If a mistake was made entering in the name repeat pressing the
key until the wrong character is selected, then press the
to correct the entry.
9. Press and hold the
10. If you want to enter the name of the connected RAM3 or Radio, repeat
steps 5 through 9.
11. Press the
GX1700
key.
soft key, then press the
soft key.
/ key to select the Unit (" Radio "
/ key to scroll through the first
soft key to store the first letter in
soft key to enter the name.
soft key several times to return to radio operation.
key until " Setup
soft
-Setup Menu-
GENERAL SETUP
CH Function Setup
DSC Setup
Waypoint Setup
GPS Setup
MMSI Setup
SELECT QUIT
-General Menu-
Display
Dimmer
Contrast
Unit of Measure
Key Beep
STATION NAME
QUIT
SELECT
-Station Name-
Select Unit
Radio
Unit Name
RADIO
ENT QUIT
-Station Name-
Select Unit
Radio
Unit Name
CADIO
ENT BACK QUIT
-Station Name-
Select Unit
Radio
Unit Name
Cabin
QUIT
ENT BACK
/
Page 75
key