Position Reply; Auto Position Interval; Dsc Beep - Standard Horizon Explorer GPS GX1700 Owner's Manual

12.6 POSITION REPLY

The GX1700 can be set up to automatically (default setting) or manually
send your position when requested by another vessel. This selection is
important if you are concerned about someone polling the position of your
vessel that you may not want to. In the manual mode you will see the MMSI
or persons name shown on the display allowing you to choose to send your
position to the requesting vessel.
Refer to section "9.8.1 Position Reply Setup" for setting.

12.7 AUTO POSITION INTERVAL

The GX1700 has the capability to automatically track four stations pro-
grammed into the Indvidual directory.
Selecting Auto POS Polling time interval between position request transmis-
sions to be setup.
Refer to section "9.11 AUTO POS POLLING" for setting.

12.8 DSC BEEP

This feature allows the alarm beeps to be turned on (default setting) or off
when a DSC call is received. The DSC calls that can be customized are: In-
dividual, Group, All Ships, Position Request, Position Report, Geographical
Call using the procedure below:
1. Press and hold down the
Menu " appears.
2. Press the
menu.
3. Press the
with the
4. Press the
/ key to the desired DSC call type and press
the soft key.
5. Press the
DSC beep and press the
6. Press the
to radio operation.
GX1700
/ key to select " DSC SETUP "
soft key, then select " DSC BEEP "
/ key.
soft key, then press the
/ key to turn " On " or " Off " the
soft key several times to return
key until " Setup
soft key.
-Setup Menu-
GENERAL SETUP
CH Function Setup
DSC Setup
Waypoint Setup
GPS Setup
MMSI Setup
SELECT QUIT
-Setup Menu-
General Setup
CH Function Setup
DSC SETUP
Waypoint Setup
GPS Setup
MMSI Setup
QUIT
SELECT
-DSC Setup-
Individual Ack
Individual Ring
Group Directory
Position Reply
Auto POS Interval
DSC BEEP
SELECT QUIT
-DSC Beep-
Select Call
Individual
Beep
On
ENT QUIT
Page 83