Cleaning - Husqvarna Viking Platinum 995E User Manual

Care of Your Platinum

Cleaning

To keep your sewing machine operating
well, clean it often. No lubrication (oiling)
is needed.
10 15
Switch off the main switch.
10 15
Wipe the exterior surfaces of your Platinum
955E sewing machine and embroidery unit
with a soft cloth to remove any dust or lint
built up.
Cleaning the Bobbin Area
Remove the presser foot and slide off the
bobbin cover. Lower the feed teeth. Place
the stitch plate opener on the brush, and
then in the recess at the rear of the stitch
plate. Turn toward you to pop off the stitch
plate. Clean the feed teeth with the brush.
Cleaning Under the Bobbin Area
When lint builds up, the area under the
bobbin case must be cleaned.
Remove the bobbin case holder (1) cover-
ing the front part of the bobbin case (2).
Remove the bobbin case by lifting it up.
Clean with the brush.
2.
Replace the bobbin case and the bobbin
case holder.
1.
Replacing the Stitch Plate
With feed teeth down, place the stitch plate
about 5 mm in front of the rear edge and
push it back. Slide on the bobbin cover.
Raise the feed teeth.
57