Attach The Embroidery Foot U - Husqvarna Viking Platinum 995E User Manual

Embroidery
Embroidery Foot U
The embroidery foot is used in two different
ways; for embroidery and when quilting with
embroidery designs or embroidering terry
cloth and other thick fabrics.
For normal embroidery the lever on the
presser foot arm should be turned so that
you can read the letter "U" (a).
When quilting or embroidering thick fabric,
a b
move the lever upwards (b). By doing so, the
presser foot is positioned slightly higher to
give extra space for the thick/batted fabric.

Attach the Embroidery Foot U

Turn off the machine, raise the presser foot
lever and remove the presser foot.
Use the Screw Grip to loosen the screw on
the presser foot ankle. Remove the ankle.
Place the Embroidery Foot U, from behind
onto the presser foot bar. The arm of the
presser foot should rest on top of the needle
clamp screw. Use the hand wheel to lower
the needle slightly until the foot slides in
place.
Position the foot so that the hole on the foot
matches the hole on the presser foot bar.
Insert the screw and tighten the screw with
the Screw Grip.
45