Arrow Buttons - Husqvarna Viking Platinum 995E User Manual

Functions and InfoDisplay on your Platinum 955E
FUNC
Touch this button to step between the
different modes of your Platinum 955E.
There are three different modes, norm,
and . The
PROG REP
sewing mode) is always active when the
machine is turned on. Touch once to
activate the mode (used when pro-
PROG
gramming), then touch again to enter the
(repeat) mode that is used to sew a
REP
programmed combination. Touch again
to return to
NORM
mode is indicated on the InfoDisplay.

Arrow Buttons

These buttons are used to advance or
return within a programmed stitch com-
bination.
Memory
Your Platinum 955E has four different
memories where programmed combina-
tions can be saved. Each memory will
hold up to 30 stitches or letters. The
button is used to advance to the memory
required in or
PROG
memory number is shown in the right
corner of the InfoDisplay.
36
mode (normal
NORM
mode. The active
. The current
REP
CLR
Touch this button in
whole or a part of a program. When a
program in a memory has been deleted,
the stitch number indication will be
cleared from the InfoDisplay.
When sewing buttonholes using the
Sensor Buttonhole Foot,
to switch the stitch length -/+ buttons
between button size and stitch length set-
ting.
Stitch Selection Menus
Your Platinum 955E has two different
main menus:
Stitches
Alphabet menu
In the Overview Window in the upper
right corner of the InfoDisplay the cur-
rently selected menu is shown.
to delete the
PROG
is used
CLR