Functions and InfoDisplay on your Platinum 955E
Programming Icons
13.
or
is visible here indicating
PROG
REP
whether you are in the programming
mode or if you are in the repetition
mode to sew out your program.
14. A number indicating the
is shown here.
MEMORY
15. The
PROGRAMMED STITCH
here.
Buttonhole Icons
When the Sensor Buttonhole Foot is connected.
16. Indicates that the Sensor Buttonhole
Foot is connected. If the icon ashes,
line up the white range on the wheel
with the white mark on the foot.
17. Set
BUTTON SIZE
stitch length (+) or (-) button. By
, you can step between
touching
CLR
setting the buttonhole size and but-
tonhole density.
When the Sensor Buttonhole Foot is not con-
nected.
18. When sewing step by step button-
holes, a ashing icon indicates that
you need to touch
direction.
40
ACTIVE
is shown
, by touching the
to change
REVERSE
13.
16.
17.
18.
15.
14.