Programming - Husqvarna Viking Platinum 995E User Manual

Programming

With Platinum 775 you can program stitches and
letters into combinations. Save the programmed
combinations in the permanent memories. A
pro-grammed stitch combination that is saved is
retained in the memory even when the machine is
turned off.
PROG mode
When programming, the Sewing Advisor
is not active. Touch
mode.
PROG
Memories
Touch to select memory. The M and the
M
number that follows indicates the active
memory. There are four different memories
(M01 to M04). Each of the four memo-
ries holds up to 55 stitches, which means
that you can program and save up to 220
stitches and/or letters.
When activating
PROG
memory is active. To save your pro-
grammed combination in a memory other
than the active, select the memory number
rst, before programming any stitches. The
programmed combination will be saved
automatically in memory.
Move the Cursor
The cursor on the display is under the
active programming space. Use the selec-
tion buttons to move the cursor sideways.
Delete Stitches or Programs
If there is a stitch or letter combination in
the selected memory that is displayed in
the programming area, touch
the memory. To reload a deleted program,
touch again before you enter new
CLR
stitches.
to activate the
FUNC
, the last used
to clear
CLR
Functions and InfoDisplay on your Platinum 775
Note: When programming, you have
the possiblity to decrease the distance
between two letters. Touch < when the
numbers/special characters menu is active,
to program short reverse stitches. The more
reverse stitches you program the shorter the dis-
tance to the next entered letter.
Note: Both the stop and x functions can be
programmed. The stop function is pro-
grammed when you want to sew only
one sequence of your program. The x
function can be used if you want to x at
the end or in the begining of a stitch within the
programmed combination.
29