Cleaning And Oiling - Husqvarna Viking H Class 200S User Manual

CLEANING AND OILING

To keep the machine running smoothly, keep it clean and lubricated at all times.
Disconnect the machine from the power supply by removing the power cord plug
from the power supply outlet.
1. Open the front cover and working table. Using the brush provided, remove dust and
ling that has accumulated.
2. Apply a few drops of oil to the points indicated by arrows.
Always use a good quality sewing machine oil.
3. Using a screwdriver, remove the top cover. Use the brush to remove dust and lint.
Cleaning the serger and foot control
Keep the serger and foot control clean. Use dry rags to remove dust from the machine
and foot control.
Use dry rags to avoid electrical shock.
Illustration
*I: Top cover screw
*II: Top cover
*III: Brush
*IV: Oil
58