One Color Embroidery - Husqvarna Viking Platinum 995E User Manual

Easy Thread Trims
When changing from one thread to
another, it is best to cut the long "jump"
stitches that are created when the hoop is
moving. This will make the thread trimming
easier when the em broi dery is nished.
Touch , the hoop moves towards you.
Cut the jump threads and touch
The hoop moves back to its ready po si tion.
/
Touch to resume the embroi-
START STOP
dery.
Fix
Before beginning to stitch the embroidery
design, touch to baste an outline aro und
FIX
the design area. This is helpful when
em broi der ing on fabrics that should not be
hooped tightly. The x func tion can also be
used to baste fabric to the sta bi liz er. This
bas ting also indicates the place ment of the
design.
When the x function is active, you cannot
step forwards or back wards color by color.

One Color Embroidery

Touch (the icon disappears from the
STOP
InfoDisplay) to cancel the color stops if
you want to sew a design in one color only.
Speed
Each stitch type in a design has a pre-set
maximum speed at which it can be sewn. If
you want to reduce the speed, for example
when using speciality threads, touch
To increase the speed again touch
again.
.
.
Embroidery
53