Table of Contents
Advertisement
ASSEMBLY STEP 2
HARDWARE foR STEP 2 :
BOLT (A)
SPRING WASHER (B)
M8 x 20 mm
8.2 mm
Qty: 6
Qty: 6
RIGHT CONSOLE MAST
LEFT CONSOLE MAST
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (C)
MAIN FRAME BRACKET
A
Open hardware for step 2.
B
Pull lead wire through right console mast.
ARC WASHER (C)
After pulling the lead wire through the mast, the
Φ8.2 x Φ17
Qty: 6
top of the console cable should be located at
the top of the mast. Detach and discard lead wire.
NOTE: Do not pinch console cable when placing
N
the mast onto the main frame bracket.
C
Attach console mast to main frame
bracket using 3 bolts (a), 3 spring
washers (b) and 3 arc washers (c).
LEAD WIRE
CONSOLE CABLE
NOTE: Do not tighten bolts until step 3 is complete.
D
Repeat step C on other side.
Elite
T5000
7
Hide quick links:
Advertisement
Table of Contents
