Applying Ambience To The Sound Of Each Multi-Effect (Ambience Send Mfx); Applying Eq To The Kit (Eq) - Roland HandSonic HPD-20 Owner's Manual

AMBIENCE SEND–MFX
MENU g FX g AMBIENCE g SEND g MFX
Parameter Explanation
Applying ambience to the sound of each multi-effect (Ambience Send MFX)
For details, refer to p. 29.
MFX1 g AMB
MFX2 g AMB Specify the amount of ambience that is applied to the sound of each multi-effect.
MFX3 g AMB
EQ
KIT EQ
MENU g FX g EQ
Parameter/Button Explanation
Applying EQ to the kit (EQ)
For details, refer to p. 30.
Adjusts the width of the frequency region selected by "Freq. "
Higher values make the region narrower, producing a more distinctive sound.
Q
* This is available only for MID.
Selects the frequency range at which the volume will be boosted or cut.
Lower values affect a lower frequency range; higher values affect a higher frequency range.
Freq
* The available range differs between LOW/MID/HIGH.
Specifies the amount by which the volume is boosted or cut.
Positive ("+") values boost the frequency region specified by "Freq. "
Gain
Negative ("-") values cut the frequency region specified by "Freq. "
If you don't want to apply an effect, set this to "0. "
[F3] (EQ) If this is on, EQ will be applied.
FX
53