Chapter 12 QR-Coded Parameter Menu
12.1 Customizing the Scanner with the QR-Coded Parameter Menu
Start setting
Three beeps
Scan parameter setting
QR Code symbols.
End setting
Three beeps
Scanning the "All defaults" QR Code symbol from the QR-coded parameter menu makes all items in the menu revert
to the factory defaults.
TIP: "Beeper volume" QR Code symbol in the QR-coded parameter menu
The beeper volume can be set even if the above procedure is omitted. No "Start setting" or "End setting" QR Code
symbol is required to be scanned.
Each time the "Beeper volume" QR Code symbol is scanned, the beeper volume cycles through High, Medium and
Low. The factory default is High.
Use the scanner to read the "Start setting" QR Code symbol.
Note: Setting the "Beeper volume" does not require this step; however, it requires
enabling the Bluetooth
interface is disabled with the "End operation" QR Code symbol, scan
If the Bluetooth
the "Start operation" QR Code symbol to enable the interface.
Scan necessary parameter setting QR Code symbols.
Scan the "End setting" QR Code symbol.
interface with the "Start operation" QR Code symbol.
91