Component Names And Functions; Bht Front/Rear - Denso BHT-604BW User Manual

BHT-604BW

1.2 Component Names and Functions

1.2.1 BHT Front/Rear

No. Name
(1) LCD (Liquid crystal display)
(2) Indicator LED
(3) Trigger switch
(4) (M3 and M4 Magic keys)
(5) IrDA interface port
(6) Hand strap
(7) Battery cover
(8) Battery cover lock
(9) Connector port
(10) Barcode reading window
(11) Charge terminal
(12) IEEE802.11 b/g
built-in antenna
8
(1)
(2)
(4)
(3)
(7)
(11)
(9)
Displays the characters and graphic patterns.
Indicates the barcode read status.
Illuminates in blue when the BHT has successfully read a barcode.
Press when reading a barcode.
The SF and ENT key functions can be assigned to these magic keys by making settings at the
SYSTEM MENU.
Character strings can be assigned at user programs.
* Refer to "Chapter 4 System Operation" for details on how to operate the SYSTEM MENU.
Used to exchange data/programs with the communication unit CU-600 or other BHTs.
Wear this strap around your wrist to prevent you from dropping the BHT accidentally.
Remove this cover to replace the battery cartridge.
Use this to lock or unlock the battery cover.
Inside this cover is the connect interface port.
Align the reading window with barcodes to perform barcode reading.
Place on the CU to charge the BHT.
Used to communicate with the wireless LAN access point.
Do not cover this antenna section with metal-evaporated tape or by hand. Doing so may result in
communication failures.
(5)
(6)
(8)
Function and Description
(10)
(12)