Table of Contents
Advertisement
SINGLE MODE
LOADING FROM HARD DISK
If you have a hard disk of any description connected via SCSI for loading sounds, you will
receive the following display when F5 is pressed:
This is almost the same as for floppy except that you can see it tells you that it is a hard disk. You
may select from different volumes by moving the cursor to the
field and scrolling through
the volumes on the disk. By moving the cursor to where it says '
' after
, you may
select different partitions to choose other volumes. Loading is done in the manner described
above - press
to load the entire volume and
to load a particular program and its
associated samples.
NOTE: There is more to using a hard disk than that, unfortunately, such as matching SCSI ID's,
formatting, etc.. For details on using the CD3000XL with a hard disk, please refer to the section
HARD DISK CONTROL in the DISK section.
Other disk operations, like saving and formatting disks, are performed in the DISK mode, not
from this page. This page is intended purely for quick access to loading from disk.
CD3000XL OperatorÕs Manual
Page 35
Advertisement
Table of Contents
